English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
ESD غرف الأبحاث الملابس
A groundable ESD cleanroom coverall combining conductive-grid fabric, connected garment panels and controlled cleanroom construction.
- Conductive-grid polyester with panel-to-panel continuity
- Configurable cuff grounding connection
- Low-lint construction for ESD-controlled clean areas
مقدمة المنتج
The ESD Cleanroom Garment is designed to participate in a facility-defined personnel grounding system while limiting particle release. Conductive-grid polyester forms the main shell, with conductive tape or thread linking the cuff, sleeves, yokes, torso and leg panels. A designated grounding stud allows connection to the approved wearer grounding route.
الخصائص الرئيسية
Integrated conductive paths connect multiple garment panels
Cuff grounding stud supports a defined bonding connection
Heat-sealed panel edges and pocket-free styling suit controlled areas
Adjustable closures help maintain body and interface coverage
مخاوف المنتج للعملاء
Conductive fabric alone does not ensure a safe path to ground. Panel continuity, garment bonding, compatible footwear or cord systems, laundering effects and routine verification all influence actual ESD performance.
Conductive panels can become isolated if seams do not provide continuity.Specify conductive tape or thread routes that electrically link the required garment panels.
An ungrounded conductive garment may behave as a floating conductor.Connect the designated stud to the facility-approved wearer grounding system and verify the complete system.
Laundering or damaged snaps can change the electrical path.Include garment continuity, grounding hardware and visual condition in periodic inspection and testing.
Loose cuffs or open closures can expose charge-generating personal clothing.Use fitted conductive cuffs and keep the front closure secured during ESD-controlled work.
تطبيقات نموذجية
Suitable for semiconductor fabrication, electronics assembly, disk-drive and optics production, battery component processing, laboratories and other ESD-protected clean areas with a verified grounding program.
المعلمات الفنية
The following ranges describe configurable garment construction, not a complete ESD system qualification. Final electrical requirements and test methods must correspond to the facility's approved ESD control plan.
| المواد الأساسية | Continuous-filament polyester with integrated carbon or conductive yarn grid |
|---|---|
| سمك اللوحة | 0.22–0.50 mm |
| العرض الفعال | 520–790 mm per laid-flat garment section |
| الحد الأقصى الطول | 2050 mm |
| الصلب يواجه سمك | 0 mm; stainless steel may be used only for grounding studs and adjusters |
| الكثافة الأساسية | 80–155 kg/m³ apparent fabric bulk density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), material dependent |
| إنهاء السطح | Smooth low-lint grid weave with heat-sealed panel edges |
| نوع المشترك | Conductive sewn seams or integrated tape linking panels to a grounding stud |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Light-blue, white, navy or green conductive-grid fabricCuff stud, hip stud or defined grounding tape routeConductive knitted cuffs or adjustable woven cuffsStand collar or compatible hood interfaceOpen ankles or compatible ESD boot interfaceGarment identification for laundering and verification tracking
Planning a ESD Cleanroom Garment specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
