ESD cleanroom garment conductive coverall three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

ESD クリーンルームの衣服

A groundable ESD cleanroom coverall combining conductive-grid fabric, connected garment panels and controlled cleanroom construction.

Conductive-grid polyester with panel-to-panel continuity
Configurable cuff grounding connection
Low-lint construction for ESD-controlled clean areas

見積もりリクエスト製品案内

商品紹介

The ESD Cleanroom Garment is designed to participate in a facility-defined personnel grounding system while limiting particle release. Conductive-grid polyester forms the main shell, with conductive tape or thread linking the cuff, sleeves, yokes, torso and leg panels. A designated grounding stud allows connection to the approved wearer grounding route.

主要な特徴

Conductive grid distributes charge across the garment surface

Integrated conductive paths connect multiple garment panels

Cuff grounding stud supports a defined bonding connection

Heat-sealed panel edges and pocket-free styling suit controlled areas

Adjustable closures help maintain body and interface coverage

お客様の製品に関する懸念事項

Conductive fabric alone does not ensure a safe path to ground. Panel continuity, garment bonding, compatible footwear or cord systems, laundering effects and routine verification all influence actual ESD performance.

Conductive panels can become isolated if seams do not provide continuity.Specify conductive tape or thread routes that electrically link the required garment panels.

An ungrounded conductive garment may behave as a floating conductor.Connect the designated stud to the facility-approved wearer grounding system and verify the complete system.

Laundering or damaged snaps can change the electrical path.Include garment continuity, grounding hardware and visual condition in periodic inspection and testing.

Loose cuffs or open closures can expose charge-generating personal clothing.Use fitted conductive cuffs and keep the front closure secured during ESD-controlled work.

典型的な用途

Suitable for semiconductor fabrication, electronics assembly, disk-drive and optics production, battery component processing, laboratories and other ESD-protected clean areas with a verified grounding program.

技術的なパラメータ

The following ranges describe configurable garment construction, not a complete ESD system qualification. Final electrical requirements and test methods must correspond to the facility's approved ESD control plan.

コア材料	Continuous-filament polyester with integrated carbon or conductive yarn grid
パネルの厚さ	0.22–0.50 mm
有効幅	520–790 mm per laid-flat garment section
最大長さ	2050 mm
鋼鉄の厚さを直面する	0 mm; stainless steel may be used only for grounding studs and adjusters
コア密度	80–155 kg/m³ apparent fabric bulk density
熱伝導率	0.035–0.060 W/(m·K), material dependent
表面仕上げ	Smooth low-lint grid weave with heat-sealed panel edges
ジョイントタイプ	Conductive sewn seams or integrated tape linking panels to a grounding stud
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Light-blue, white, navy or green conductive-grid fabricCuff stud, hip stud or defined grounding tape routeConductive knitted cuffs or adjustable woven cuffsStand collar or compatible hood interfaceOpen ankles or compatible ESD boot interfaceGarment identification for laundering and verification tracking

Planning a ESD Cleanroom Garment specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する