Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Gabinete de armazenamento seco
A non-powered Type 304L stainless cabinet that uses replaceable indicating-silica-gel cartridges and gasketed clear doors for moderate-humidity storage in clean areas.
- Non-powered desiccant drying
- Four serviceable silica-gel cartridges
- Five removable perforated storage shelves
- Battery-powered RH display
Introdução do produto
The dry storage cabinet provides a simple sealed environment for instruments, powders and packaged components that need protection from ordinary room humidity but do not require active ultra-low-RH control. A Type 304L stainless carcass contains five removable perforated shelves behind twin clear gasketed doors. Four amber indicating-silica-gel cartridges mount in recessed blue holders along the rear wall, where they can be removed for regeneration without dismantling the shelf system. A battery-powered RH display senses the cabinet atmosphere independently of mains power, and a small manual equalization valve releases pressure before the compression latch is opened.
Características-chave
Perforated shelves leave a continuous diffusion path between the rear desiccant cartridges and each storage level.
Clear twin doors reveal inventory and cartridge color while continuous blue gaskets limit room-air leakage.
A battery-powered RH display and manual pressure-equalization valve keep condition checks and door release outside the storage volume.
Preocupações do produto do cliente
Moderate dry storage should remain clean and serviceable without adding active machinery that is unnecessary for the stored load.
Small instruments corrode or tarnish during long residence in humid storage rooms.Four distributed silica-gel cartridges adsorb moisture within the sealed stainless enclosure.
Loose desiccant bags obstruct shelves and shed particles near stored components.Rigid cartridges lock into recessed rear holders away from the usable shelf surface.
Operators cannot judge when a passive desiccant charge needs regeneration.Visible indicating media and the independent RH display give two direct condition checks.
Fixed solid shelves create isolated pockets with slow moisture diffusion.Five removable perforated shelves keep a continuous passive air path through the full cabinet height.
Aplicações típicas
Cleanroom tool and gauge storageLaboratory powder and reagent holdingOptical component protectionCalibration artifact storagePackaged medical-device component staging
Parâmetros técnicos
Typical configurable specifications for a passive stainless cleanroom dry storage cabinet are listed below.
| Material principal | Type 304L stainless steel sealed enclosure with clear laminated doors, five perforated shelves, four indicating-silica-gel cartridges and battery-powered RH display |
|---|---|
| Painel de espessura | 1.2–1.5 mm stainless cabinet panels, door frames and perforated shelves |
| Largura efetiva | 1000 mm overall cabinet width |
| Comprimento máximo | 1850 mm maximum overall height including the sloped hygienic top |
| Aço enfrentando espessura | 1.2–1.5 mm Type 304L stainless outer body, interior liner and shelf pans |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável tipo 304L |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável tipo 304L |
| Superfície acabado | Brushed 320-grit stainless with clear laminated glazing, cobalt-blue silicone door seals and amber indicating-desiccant cartridges |
| Tipo conjunto | Continuously welded carcass with gasketed twin doors, compression latch, removable perforated shelf rails, sealed cartridge holders and manual equalization valve |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Regenerable silica gel or molecular-sieve cartridgesLockable door handleStatic-dissipative clear panelsType 316L electropolished construction
Planning a Dry Storage Cabinet specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
