Kabinet Penyimpanan Kering
- Non-powered desiccant drying
- Four serviceable silica-gel cartridges
- Five removable perforated storage shelves
- Battery-powered RH display
Perkenalan produk
The dry storage cabinet provides a simple sealed environment for instruments, powders and packaged components that need protection from ordinary room humidity but do not require active ultra-low-RH control. A Type 304L stainless carcass contains five removable perforated shelves behind twin clear gasketed doors. Four amber indicating-silica-gel cartridges mount in recessed blue holders along the rear wall, where they can be removed for regeneration without dismantling the shelf system. A battery-powered RH display senses the cabinet atmosphere independently of mains power, and a small manual equalization valve releases pressure before the compression latch is opened.
Fitur utama:
Perforated shelves leave a continuous diffusion path between the rear desiccant cartridges and each storage level.
Clear twin doors reveal inventory and cartridge color while continuous blue gaskets limit room-air leakage.
A battery-powered RH display and manual pressure-equalization valve keep condition checks and door release outside the storage volume.
Kekhawatiran produk pelanggan
Moderate dry storage should remain clean and serviceable without adding active machinery that is unnecessary for the stored load.
Aplikasi yang Tipis
Parameter teknis
Typical configurable specifications for a passive stainless cleanroom dry storage cabinet are listed below.
| Bahan inti | Type 304L stainless steel sealed enclosure with clear laminated doors, five perforated shelves, four indicating-silica-gel cartridges and battery-powered RH display |
|---|---|
| Ketebalan Panel (Panel Thickness) | 1.2–1.5 mm stainless cabinet panels, door frames and perforated shelves |
| Efektif lebar | 1000 mm overall cabinet width |
| Panjang maksimum | 1850 mm maximum overall height including the sloped hygienic top |
| Baja menghadap ketebalan | 1.2–1.5 mm Type 304L stainless outer body, interior liner and shelf pans |
| Kepadatan inti (core density) | 7900 - 8000 kg / m3 untuk baja tahan karat Tipe 304L |
| Konduktivitas Termal (Thermal Conductivity) | 14 - 16 W / (m · K) untuk baja tahan karat Tipe 304L |
| Permukaan selesai | Brushed 320-grit stainless with clear laminated glazing, cobalt-blue silicone door seals and amber indicating-desiccant cartridges |
| Jenis Bersama | Continuously welded carcass with gasketed twin doors, compression latch, removable perforated shelf rails, sealed cartridge holders and manual equalization valve |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Planning a Dry Storage Cabinet specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam