Stainless passive dry storage cabinet with clear gasketed doors

클린룸 가구 및 스테인레스 스틸 제품

건조 저장 캐비닛

A non-powered Type 304L stainless cabinet that uses replaceable indicating-silica-gel cartridges and gasketed clear doors for moderate-humidity storage in clean areas.

Non-powered desiccant drying
Four serviceable silica-gel cartridges
Five removable perforated storage shelves
Battery-powered RH display

견적 요청 제품 찾아보기

상품 소개

The dry storage cabinet provides a simple sealed environment for instruments, powders and packaged components that need protection from ordinary room humidity but do not require active ultra-low-RH control. A Type 304L stainless carcass contains five removable perforated shelves behind twin clear gasketed doors. Four amber indicating-silica-gel cartridges mount in recessed blue holders along the rear wall, where they can be removed for regeneration without dismantling the shelf system. A battery-powered RH display senses the cabinet atmosphere independently of mains power, and a small manual equalization valve releases pressure before the compression latch is opened.

주요 기능

Replaceable indicating-silica-gel cartridges provide dry storage without a blower, heater, gas line or permanent electrical supply.

Perforated shelves leave a continuous diffusion path between the rear desiccant cartridges and each storage level.

Clear twin doors reveal inventory and cartridge color while continuous blue gaskets limit room-air leakage.

A battery-powered RH display and manual pressure-equalization valve keep condition checks and door release outside the storage volume.

고객 제품 관심사

Moderate dry storage should remain clean and serviceable without adding active machinery that is unnecessary for the stored load.

Small instruments corrode or tarnish during long residence in humid storage rooms.Four distributed silica-gel cartridges adsorb moisture within the sealed stainless enclosure.

Loose desiccant bags obstruct shelves and shed particles near stored components.Rigid cartridges lock into recessed rear holders away from the usable shelf surface.

Operators cannot judge when a passive desiccant charge needs regeneration.Visible indicating media and the independent RH display give two direct condition checks.

Fixed solid shelves create isolated pockets with slow moisture diffusion.Five removable perforated shelves keep a continuous passive air path through the full cabinet height.

일반적인 응용 프로그램

Cleanroom tool and gauge storageLaboratory powder and reagent holdingOptical component protectionCalibration artifact storagePackaged medical-device component staging

기술 매개변수

Typical configurable specifications for a passive stainless cleanroom dry storage cabinet are listed below.

핵심 재료	Type 304L stainless steel sealed enclosure with clear laminated doors, five perforated shelves, four indicating-silica-gel cartridges and battery-powered RH display
패널 두께	1.2–1.5 mm stainless cabinet panels, door frames and perforated shelves
유효 폭	1000 mm overall cabinet width
최대 길이	1850 mm maximum overall height including the sloped hygienic top
강철 면면 두께	1.2–1.5 mm Type 304L stainless outer body, interior liner and shelf pans
코어 밀도	7900–8000 kg/m³ for Type 304L stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 304L stainless steel
표면 마무리	Brushed 320-grit stainless with clear laminated glazing, cobalt-blue silicone door seals and amber indicating-desiccant cartridges
접합 유형	Continuously welded carcass with gasketed twin doors, compression latch, removable perforated shelf rails, sealed cartridge holders and manual equalization valve
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Regenerable silica gel or molecular-sieve cartridgesLockable door handleStatic-dissipative clear panelsType 316L electropolished construction

Planning a Dry Storage Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.