English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Сухой шкаф
A non-powered Type 304L stainless cabinet that uses replaceable indicating-silica-gel cartridges and gasketed clear doors for moderate-humidity storage in clean areas.
- Non-powered desiccant drying
- Four serviceable silica-gel cartridges
- Five removable perforated storage shelves
- Battery-powered RH display
Введение продукции
The dry storage cabinet provides a simple sealed environment for instruments, powders and packaged components that need protection from ordinary room humidity but do not require active ultra-low-RH control. A Type 304L stainless carcass contains five removable perforated shelves behind twin clear gasketed doors. Four amber indicating-silica-gel cartridges mount in recessed blue holders along the rear wall, where they can be removed for regeneration without dismantling the shelf system. A battery-powered RH display senses the cabinet atmosphere independently of mains power, and a small manual equalization valve releases pressure before the compression latch is opened.
Основные характеристики
Perforated shelves leave a continuous diffusion path between the rear desiccant cartridges and each storage level.
Clear twin doors reveal inventory and cartridge color while continuous blue gaskets limit room-air leakage.
A battery-powered RH display and manual pressure-equalization valve keep condition checks and door release outside the storage volume.
Обеспокоенность клиентов продуктами
Moderate dry storage should remain clean and serviceable without adding active machinery that is unnecessary for the stored load.
Small instruments corrode or tarnish during long residence in humid storage rooms.Four distributed silica-gel cartridges adsorb moisture within the sealed stainless enclosure.
Loose desiccant bags obstruct shelves and shed particles near stored components.Rigid cartridges lock into recessed rear holders away from the usable shelf surface.
Operators cannot judge when a passive desiccant charge needs regeneration.Visible indicating media and the independent RH display give two direct condition checks.
Fixed solid shelves create isolated pockets with slow moisture diffusion.Five removable perforated shelves keep a continuous passive air path through the full cabinet height.
Типичные приложения
Cleanroom tool and gauge storageLaboratory powder and reagent holdingOptical component protectionCalibration artifact storagePackaged medical-device component staging
Технические параметры
Typical configurable specifications for a passive stainless cleanroom dry storage cabinet are listed below.
| Основной материал | Type 304L stainless steel sealed enclosure with clear laminated doors, five perforated shelves, four indicating-silica-gel cartridges and battery-powered RH display |
|---|---|
| Толщина панели | 1.2–1.5 mm stainless cabinet panels, door frames and perforated shelves |
| эффективная ширина | 1000 mm overall cabinet width |
| Максимальная длина | 1850 mm maximum overall height including the sloped hygienic top |
| Толщина линий стали | 1.2–1.5 mm Type 304L stainless outer body, interior liner and shelf pans |
| Плотность ядра | 7900–8000 kg/m³ for Type 304L stainless steel |
| Теплопроводимость | 14–16 W/(m·K) for Type 304L stainless steel |
| Поверхностная отделка | Brushed 320-grit stainless with clear laminated glazing, cobalt-blue silicone door seals and amber indicating-desiccant cartridges |
| Объединенный тип | Continuously welded carcass with gasketed twin doors, compression latch, removable perforated shelf rails, sealed cartridge holders and manual equalization valve |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Regenerable silica gel or molecular-sieve cartridgesLockable door handleStatic-dissipative clear panelsType 316L electropolished construction
Planning a Dry Storage Cabinet specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
