Tủ lưu trữ khô
- Non-powered desiccant drying
- Four serviceable silica-gel cartridges
- Five removable perforated storage shelves
- Battery-powered RH display
Giới thiệu Sản phẩm
The dry storage cabinet provides a simple sealed environment for instruments, powders and packaged components that need protection from ordinary room humidity but do not require active ultra-low-RH control. A Type 304L stainless carcass contains five removable perforated shelves behind twin clear gasketed doors. Four amber indicating-silica-gel cartridges mount in recessed blue holders along the rear wall, where they can be removed for regeneration without dismantling the shelf system. A battery-powered RH display senses the cabinet atmosphere independently of mains power, and a small manual equalization valve releases pressure before the compression latch is opened.
Các tính năng chính
Perforated shelves leave a continuous diffusion path between the rear desiccant cartridges and each storage level.
Clear twin doors reveal inventory and cartridge color while continuous blue gaskets limit room-air leakage.
A battery-powered RH display and manual pressure-equalization valve keep condition checks and door release outside the storage volume.
Các mối quan tâm về sản phẩm của khách hàng
Moderate dry storage should remain clean and serviceable without adding active machinery that is unnecessary for the stored load.
Các ứng dụng điển hình
Thông số kỹ thuật
Typical configurable specifications for a passive stainless cleanroom dry storage cabinet are listed below.
| Vật liệu lõi | Type 304L stainless steel sealed enclosure with clear laminated doors, five perforated shelves, four indicating-silica-gel cartridges and battery-powered RH display |
|---|---|
| Độ dày bảng điều khiển | 1.2–1.5 mm stainless cabinet panels, door frames and perforated shelves |
| Chiều rộng hiệu quả | 1000 mm overall cabinet width |
| Chiều dài tối đa | 1850 mm maximum overall height including the sloped hygienic top |
| Thép đối mặt với độ dày | 1.2–1.5 mm Type 304L stainless outer body, interior liner and shelf pans |
| Mật độ lõi | 7900 - 8000 kg / m3 cho loại thép không gỉ 304L |
| Độ dẫn nhiệt | 14-16 W / (m · K) cho loại thép không gỉ 304L |
| Kết thúc bề mặt | Brushed 320-grit stainless with clear laminated glazing, cobalt-blue silicone door seals and amber indicating-desiccant cartridges |
| Loại khớp nối | Continuously welded carcass with gasketed twin doors, compression latch, removable perforated shelf rails, sealed cartridge holders and manual equalization valve |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Các tùy chọn có sẵn
Planning a Dry Storage Cabinet specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại