Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de manuseio de ar e HVAC para sala limpa
Z Humidificador de injeção direta de vapor
A conditioned-steam assembly that separates condensate, modulates plant steam and disperses dry vapor through a preheated stainless duct lance.
- Dry Plant-Steam Conditioning
- Cyclonic Moisture Separation
- Modulating Control Valve
- Preheated Dispersion Lance
Introdução do produto
Plant steam first enters a vertical separator where velocity changes and internal baffles remove entrained condensate. A modulating valve meters the dry steam to a stainless distribution lance, while a tracer circuit warms the lance to reduce internal condensation. Steam traps continuously drain the separator and tracer so only conditioned vapor reaches the airstream.
Características-chave
A modulating valve adjusts plant-steam flow directly to humidity demand without a local electric boiler.
The preheated stainless lance limits condensation at the dispersion orifices during modulation.
Independent separator and tracer traps maintain continuous drainage and reduce waterhammer risk.
Preocupações do produto do cliente
Direct injection is effective only when plant steam is dry, accurately metered and dispersed before duct surfaces can become wet.
Wet plant steam spits condensate from duct nozzles.The vertical separator and continuous trap remove liquid before steam enters the dispersion lance.
An unheated lance condenses steam at low output.A tracer circuit preheats the stainless lance and drains its condensate separately.
Short absorption distance wets downstream filters.One or more correctly sized lances distribute steam across the duct face in smaller jets.
A sticking valve causes humidity overshoot.A characterized modulating valve and matched actuator provide repeatable flow control.
Aplicações típicas
Large pharmaceutical air handlersHospital central-steam HVACIndustrial cleanroom make-up airLaboratory ventilation systemsHigh-capacity process-air humidification
Parâmetros técnicos
Representative construction ranges for a conditioned direct-steam humidifier are listed below.
| Material principal | AISI 304 or 316L stainless separator and preheated dispersion lance |
|---|---|
| Painel de espessura | 1.5-3.0 mm separator shell and lance wall thickness |
| Largura efetiva | 300-3500 mm compatible duct width |
| Comprimento máximo | Up to 4000 mm maximum multi-lance dispersion assembly length |
| Aço enfrentando espessura | 1.5-3.0 mm stainless separator and lance construction |
| Densidade Core | Approximately 7900-8000 kg/m³ for stainless wetted components |
| Condutividade térmica | Approximately 14-16 W/(m·K) for austenitic stainless steel |
| Superfície acabado | Pickled and passivated or mechanically polished stainless surfaces |
| Tipo conjunto | Flanged or threaded steam inlet with compression-connected tracer and bolted duct-lance flange |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single or multiple dispersion lancesAISI 304 or 316L wetted constructionElectric or pneumatic valve actuatorDifferent steam pressure, valve size and lance length
Planning a Direct Steam Injection Humidifier specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
