Direct steam injection humidifier with separator and dispersion lance

클린룸 HVAC 및 공기 처리 장비

직접 증기 분사 가습기

A conditioned-steam assembly that separates condensate, modulates plant steam and disperses dry vapor through a preheated stainless duct lance.

Dry Plant-Steam Conditioning
Cyclonic Moisture Separation
Modulating Control Valve
Preheated Dispersion Lance

견적 요청 제품 찾아보기

상품 소개

Plant steam first enters a vertical separator where velocity changes and internal baffles remove entrained condensate. A modulating valve meters the dry steam to a stainless distribution lance, while a tracer circuit warms the lance to reduce internal condensation. Steam traps continuously drain the separator and tracer so only conditioned vapor reaches the airstream.

주요 기능

Cyclonic and baffle separation removes liquid droplets before the control valve and lance.

A modulating valve adjusts plant-steam flow directly to humidity demand without a local electric boiler.

The preheated stainless lance limits condensation at the dispersion orifices during modulation.

Independent separator and tracer traps maintain continuous drainage and reduce waterhammer risk.

고객 제품 관심사

Direct injection is effective only when plant steam is dry, accurately metered and dispersed before duct surfaces can become wet.

Wet plant steam spits condensate from duct nozzles.The vertical separator and continuous trap remove liquid before steam enters the dispersion lance.

An unheated lance condenses steam at low output.A tracer circuit preheats the stainless lance and drains its condensate separately.

Short absorption distance wets downstream filters.One or more correctly sized lances distribute steam across the duct face in smaller jets.

A sticking valve causes humidity overshoot.A characterized modulating valve and matched actuator provide repeatable flow control.

일반적인 응용 프로그램

Large pharmaceutical air handlersHospital central-steam HVACIndustrial cleanroom make-up airLaboratory ventilation systemsHigh-capacity process-air humidification

기술 매개변수

Representative construction ranges for a conditioned direct-steam humidifier are listed below.

핵심 재료	AISI 304 or 316L stainless separator and preheated dispersion lance
패널 두께	1.5-3.0 mm separator shell and lance wall thickness
유효 폭	300-3500 mm compatible duct width
최대 길이	Up to 4000 mm maximum multi-lance dispersion assembly length
강철 면면 두께	1.5-3.0 mm stainless separator and lance construction
코어 밀도	Approximately 7900-8000 kg/m³ for stainless wetted components
열전도도 (Thermal Conductivity)	Approximately 14-16 W/(m·K) for austenitic stainless steel
표면 마무리	Pickled and passivated or mechanically polished stainless surfaces
접합 유형	Flanged or threaded steam inlet with compression-connected tracer and bolted duct-lance flange
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or multiple dispersion lancesAISI 304 or 316L wetted constructionElectric or pneumatic valve actuatorDifferent steam pressure, valve size and lance length

Planning a Direct Steam Injection Humidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.