Direct steam injection humidifier with separator and dispersion lance

クリーンルーム HVAC および空気処理装置

直接蒸気注入加湿器

A conditioned-steam assembly that separates condensate, modulates plant steam and disperses dry vapor through a preheated stainless duct lance.

Dry Plant-Steam Conditioning
Cyclonic Moisture Separation
Modulating Control Valve
Preheated Dispersion Lance

見積もりリクエスト製品案内

商品紹介

Plant steam first enters a vertical separator where velocity changes and internal baffles remove entrained condensate. A modulating valve meters the dry steam to a stainless distribution lance, while a tracer circuit warms the lance to reduce internal condensation. Steam traps continuously drain the separator and tracer so only conditioned vapor reaches the airstream.

主要な特徴

Cyclonic and baffle separation removes liquid droplets before the control valve and lance.

A modulating valve adjusts plant-steam flow directly to humidity demand without a local electric boiler.

The preheated stainless lance limits condensation at the dispersion orifices during modulation.

Independent separator and tracer traps maintain continuous drainage and reduce waterhammer risk.

お客様の製品に関する懸念事項

Direct injection is effective only when plant steam is dry, accurately metered and dispersed before duct surfaces can become wet.

Wet plant steam spits condensate from duct nozzles.The vertical separator and continuous trap remove liquid before steam enters the dispersion lance.

An unheated lance condenses steam at low output.A tracer circuit preheats the stainless lance and drains its condensate separately.

Short absorption distance wets downstream filters.One or more correctly sized lances distribute steam across the duct face in smaller jets.

A sticking valve causes humidity overshoot.A characterized modulating valve and matched actuator provide repeatable flow control.

典型的な用途

Large pharmaceutical air handlersHospital central-steam HVACIndustrial cleanroom make-up airLaboratory ventilation systemsHigh-capacity process-air humidification

技術的なパラメータ

Representative construction ranges for a conditioned direct-steam humidifier are listed below.

コア材料	AISI 304 or 316L stainless separator and preheated dispersion lance
パネルの厚さ	1.5-3.0 mm separator shell and lance wall thickness
有効幅	300-3500 mm compatible duct width
最大長さ	Up to 4000 mm maximum multi-lance dispersion assembly length
鋼鉄の厚さを直面する	1.5-3.0 mm stainless separator and lance construction
コア密度	Approximately 7900-8000 kg/m³ for stainless wetted components
熱伝導率	Approximately 14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Pickled and passivated or mechanically polished stainless surfaces
ジョイントタイプ	Flanged or threaded steam inlet with compression-connected tracer and bolted duct-lance flange
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or multiple dispersion lancesAISI 304 or 316L wetted constructionElectric or pneumatic valve actuatorDifferent steam pressure, valve size and lance length

Planning a Direct Steam Injection Humidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する