Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Sensor de pressão diferencial
A compact low-range sensor that detects the pressure difference between a cleanroom and reference space for control, display or alarm input.
- Low-Range MEMS Measurement
- Dual Reference Ports
- Fast Room Response
- Zero Adjustment Access
Introdução do produto
This differential pressure sensor uses a silicon MEMS element to measure the small pressure differences found across cleanroom doors, walls, filters and airflow devices. Separate high and low ports accept clean tubing from the monitored and reference sides. The compact module can mount inside a room controller or protected enclosure, keeping the sensitive element away from direct handling. Temperature compensation and accessible zero adjustment support stable readings near zero where room-pressure decisions are made.
Características-chave
Barbed high and low ports keep the reference direction physically clear.
Temperature-compensated MEMS sensing reduces drift across normal indoor conditions.
Compact board or enclosure formats integrate into displays, controllers and transmitters.
Preocupações do produto do cliente
Near-zero differential pressure is easily distorted by tubing errors, sensor drift and excessive measurement range.
A high-range sensor shows little change across the cleanroom operating band.A low-range MEMS element provides finer resolution around the required pressure setpoint.
Reversed tubing makes positive rooms appear negative.Clearly marked high and low ports preserve the intended reference direction.
Small zero drift creates false alarms when the room is stable.Accessible zero adjustment and temperature compensation reduce offset near zero.
Direct exposure to cleaning activity damages the sensing element.Remote pressure tubing allows the sensor module to remain in a protected enclosure.
Aplicações típicas
Room-to-corridor pressure sensingAirlock differential measurementHEPA filter pressure monitoringLow-pressure airflow devices
Parâmetros técnicos
Typical materials and dimensions for a cleanroom low-range differential pressure sensor are listed below.
| Material principal | Silicon MEMS sensing die with glass-filled polymer body and nickel-plated brass pressure ports |
|---|---|
| Painel de espessura | 18-35 mm sensor body depth |
| Largura efetiva | 35-80 mm housing width |
| Comprimento máximo | Up to 120 mm housing length |
| Aço enfrentando espessura | 0 mm; non-metallic sensor housing |
| Densidade Core | 1350-1550 kg/m³ for glass-filled polymer housing |
| Condutividade térmica | 0.25-0.40 W/(m·K) for reinforced polymer housing |
| Superfície acabado | Smooth white or light-gray polymer housing with blue high-low port markings |
| Tipo conjunto | Dual barbed pressure ports with board connector or pluggable electrical terminal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Positive, negative or bidirectional rangeBoard-mount or enclosed formatAnalog or digital outputAutomatic zero function
Planning a Differential Pressure Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
