English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Датчик дифференциального давления
A compact low-range sensor that detects the pressure difference between a cleanroom and reference space for control, display or alarm input.
- Low-Range MEMS Measurement
- Dual Reference Ports
- Fast Room Response
- Zero Adjustment Access
Введение продукции
This differential pressure sensor uses a silicon MEMS element to measure the small pressure differences found across cleanroom doors, walls, filters and airflow devices. Separate high and low ports accept clean tubing from the monitored and reference sides. The compact module can mount inside a room controller or protected enclosure, keeping the sensitive element away from direct handling. Temperature compensation and accessible zero adjustment support stable readings near zero where room-pressure decisions are made.
Основные характеристики
Barbed high and low ports keep the reference direction physically clear.
Temperature-compensated MEMS sensing reduces drift across normal indoor conditions.
Compact board or enclosure formats integrate into displays, controllers and transmitters.
Обеспокоенность клиентов продуктами
Near-zero differential pressure is easily distorted by tubing errors, sensor drift and excessive measurement range.
A high-range sensor shows little change across the cleanroom operating band.A low-range MEMS element provides finer resolution around the required pressure setpoint.
Reversed tubing makes positive rooms appear negative.Clearly marked high and low ports preserve the intended reference direction.
Small zero drift creates false alarms when the room is stable.Accessible zero adjustment and temperature compensation reduce offset near zero.
Direct exposure to cleaning activity damages the sensing element.Remote pressure tubing allows the sensor module to remain in a protected enclosure.
Типичные приложения
Room-to-corridor pressure sensingAirlock differential measurementHEPA filter pressure monitoringLow-pressure airflow devices
Технические параметры
Typical materials and dimensions for a cleanroom low-range differential pressure sensor are listed below.
| Основной материал | Silicon MEMS sensing die with glass-filled polymer body and nickel-plated brass pressure ports |
|---|---|
| Толщина панели | 18-35 mm sensor body depth |
| эффективная ширина | 35-80 mm housing width |
| Максимальная длина | Up to 120 mm housing length |
| Толщина линий стали | 0 mm; non-metallic sensor housing |
| Плотность ядра | 1350-1550 kg/m³ for glass-filled polymer housing |
| Теплопроводимость | 0.25-0.40 W/(m·K) for reinforced polymer housing |
| Поверхностная отделка | Smooth white or light-gray polymer housing with blue high-low port markings |
| Объединенный тип | Dual barbed pressure ports with board connector or pluggable electrical terminal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Positive, negative or bidirectional rangeBoard-mount or enclosed formatAnalog or digital outputAutomatic zero function
Planning a Differential Pressure Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
