İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kontrolü ve Çevre İzleme Sistemleri
Farklı Basınç Sensörü
A compact low-range sensor that detects the pressure difference between a cleanroom and reference space for control, display or alarm input.
- Low-Range MEMS Measurement
- Dual Reference Ports
- Fast Room Response
- Zero Adjustment Access
Ürün tanıtımı
This differential pressure sensor uses a silicon MEMS element to measure the small pressure differences found across cleanroom doors, walls, filters and airflow devices. Separate high and low ports accept clean tubing from the monitored and reference sides. The compact module can mount inside a room controller or protected enclosure, keeping the sensitive element away from direct handling. Temperature compensation and accessible zero adjustment support stable readings near zero where room-pressure decisions are made.
Ana Özellikler
Barbed high and low ports keep the reference direction physically clear.
Temperature-compensated MEMS sensing reduces drift across normal indoor conditions.
Compact board or enclosure formats integrate into displays, controllers and transmitters.
Müşteri Ürün Sorunları
Near-zero differential pressure is easily distorted by tubing errors, sensor drift and excessive measurement range.
A high-range sensor shows little change across the cleanroom operating band.A low-range MEMS element provides finer resolution around the required pressure setpoint.
Reversed tubing makes positive rooms appear negative.Clearly marked high and low ports preserve the intended reference direction.
Small zero drift creates false alarms when the room is stable.Accessible zero adjustment and temperature compensation reduce offset near zero.
Direct exposure to cleaning activity damages the sensing element.Remote pressure tubing allows the sensor module to remain in a protected enclosure.
Tipik uygulamalar
Room-to-corridor pressure sensingAirlock differential measurementHEPA filter pressure monitoringLow-pressure airflow devices
Teknik parametreler
Typical materials and dimensions for a cleanroom low-range differential pressure sensor are listed below.
| Temel malzemeler | Silicon MEMS sensing die with glass-filled polymer body and nickel-plated brass pressure ports |
|---|---|
| Panel kalınlığı | 18-35 mm sensor body depth |
| Effective Width (Etkili Genişlik) | 35-80 mm housing width |
| Maksimum uzunluk | Up to 120 mm housing length |
| Çelik yüz yüze kalınlığı | 0 mm; non-metallic sensor housing |
| Core Density (Çekirdek Yoğunluğu) | 1350-1550 kg/m³ for glass-filled polymer housing |
| Termal İletkenlik | 0.25-0.40 W/(m·K) for reinforced polymer housing |
| Yüzey bitirme | Smooth white or light-gray polymer housing with blue high-low port markings |
| Ortak tip | Dual barbed pressure ports with board connector or pluggable electrical terminal |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Positive, negative or bidirectional rangeBoard-mount or enclosed formatAnalog or digital outputAutomatic zero function
Planning a Differential Pressure Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
