Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Sala limpa Squeeze Bottle
Flexible translucent LDPE cleanroom squeeze bottle with a white polypropylene closure, integrated bent nozzle and full-length draw tube.
- Flexible LDPE body provides controlled one-handed dispensing
- Integrated bent nozzle directs a smooth rinse stream
- Tight draw-tube connection limits sputtering and separation
Introdução do produto
The Cleanroom Squeeze Bottle is a soft-sided cylindrical dispenser designed to deliver a controlled liquid stream when the body is compressed. Its polypropylene screw closure incorporates a bent nozzle, and the internal draw tube reaches toward the bottle base. The compact assembly contains no separate trigger mechanism and can be operated easily with gloved hands.
Características-chave
Bent nozzle directs solution toward confined surfaces or containers
One-piece closure and nozzle reduce detachable components
Secure draw tube supports smooth, low-sputter flow
Translucent body makes remaining liquid easy to estimate
Preocupações do produto do cliente
Squeeze-bottle performance depends on an unobstructed nozzle, an airtight closure and a correctly seated draw tube. Aggressive liquids or excessive tip cutting can change flow and containment.
A loose closure can draw air and interrupt the stream.Tighten the threaded closure evenly and inspect the neck seal.
A blocked or damaged nozzle can cause unpredictable discharge.Keep the tip capped or protected and replace damaged closures.
The draw tube may lift away from the lowest part of the bottle.Specify the tube length for the selected bottle capacity.
Refilled bottles may retain incompatible residue.Dedicate each bottle to one solution or use a validated cleaning cycle.
Aplicações típicas
For precision rinsing, wetting cleanroom wipes, adding high-purity water, applying compatible solvents and dispensing laboratory working solutions in controlled areas.
Parâmetros técnicos
These ranges cover common 125-1000 mL LDPE wash and squeeze bottles. Final tip bore, closure color, tube length and resin should match the required liquid and flow rate.
| Material principal | Flexible LDPE bottle with PP closure and PPCO or PE draw tube |
|---|---|
| Painel de espessura | 0.7-1.5 mm nominal bottle wall |
| Largura efetiva | 45-95 mm bottle diameter |
| Comprimento máximo | 230 mm overall height with nozzle |
| Aço enfrentando espessura | 0 mm; all-polymer dispenser |
| Densidade Core | 910-940 kg/m³ LDPE bottle |
| Condutividade térmica | 0.31-0.36 W/(m·K), typical LDPE range |
| Superfície acabado | Smooth natural translucent body with white nozzle closure |
| Tipo conjunto | Threaded closure with integrated bent nozzle and internal draw tube |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
125-1000 mL capacitiesNatural translucent or opaque LDPE bodyStraight, bent or color-coded nozzleNarrow or enlarged tip boreProtective nozzle capClean double-bagged presentation
Planning a Cleanroom Squeeze Bottle specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
