English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Бутылка для сжатия в чистой комнате
Flexible translucent LDPE cleanroom squeeze bottle with a white polypropylene closure, integrated bent nozzle and full-length draw tube.
- Flexible LDPE body provides controlled one-handed dispensing
- Integrated bent nozzle directs a smooth rinse stream
- Tight draw-tube connection limits sputtering and separation
Введение продукции
The Cleanroom Squeeze Bottle is a soft-sided cylindrical dispenser designed to deliver a controlled liquid stream when the body is compressed. Its polypropylene screw closure incorporates a bent nozzle, and the internal draw tube reaches toward the bottle base. The compact assembly contains no separate trigger mechanism and can be operated easily with gloved hands.
Основные характеристики
Bent nozzle directs solution toward confined surfaces or containers
One-piece closure and nozzle reduce detachable components
Secure draw tube supports smooth, low-sputter flow
Translucent body makes remaining liquid easy to estimate
Обеспокоенность клиентов продуктами
Squeeze-bottle performance depends on an unobstructed nozzle, an airtight closure and a correctly seated draw tube. Aggressive liquids or excessive tip cutting can change flow and containment.
A loose closure can draw air and interrupt the stream.Tighten the threaded closure evenly and inspect the neck seal.
A blocked or damaged nozzle can cause unpredictable discharge.Keep the tip capped or protected and replace damaged closures.
The draw tube may lift away from the lowest part of the bottle.Specify the tube length for the selected bottle capacity.
Refilled bottles may retain incompatible residue.Dedicate each bottle to one solution or use a validated cleaning cycle.
Типичные приложения
For precision rinsing, wetting cleanroom wipes, adding high-purity water, applying compatible solvents and dispensing laboratory working solutions in controlled areas.
Технические параметры
These ranges cover common 125-1000 mL LDPE wash and squeeze bottles. Final tip bore, closure color, tube length and resin should match the required liquid and flow rate.
| Основной материал | Flexible LDPE bottle with PP closure and PPCO or PE draw tube |
|---|---|
| Толщина панели | 0.7-1.5 mm nominal bottle wall |
| эффективная ширина | 45-95 mm bottle diameter |
| Максимальная длина | 230 mm overall height with nozzle |
| Толщина линий стали | 0 mm; all-polymer dispenser |
| Плотность ядра | 910-940 kg/m³ LDPE bottle |
| Теплопроводимость | 0.31-0.36 W/(m·K), typical LDPE range |
| Поверхностная отделка | Smooth natural translucent body with white nozzle closure |
| Объединенный тип | Threaded closure with integrated bent nozzle and internal draw tube |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
125-1000 mL capacitiesNatural translucent or opaque LDPE bodyStraight, bent or color-coded nozzleNarrow or enlarged tip boreProtective nozzle capClean double-bagged presentation
Planning a Cleanroom Squeeze Bottle specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
