Translucent LDPE cleanroom squeeze bottle in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Bilik bersih memerah botol

Flexible translucent LDPE cleanroom squeeze bottle with a white polypropylene closure, integrated bent nozzle and full-length draw tube.

Flexible LDPE body provides controlled one-handed dispensing
Integrated bent nozzle directs a smooth rinse stream
Tight draw-tube connection limits sputtering and separation

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Squeeze Bottle is a soft-sided cylindrical dispenser designed to deliver a controlled liquid stream when the body is compressed. Its polypropylene screw closure incorporates a bent nozzle, and the internal draw tube reaches toward the bottle base. The compact assembly contains no separate trigger mechanism and can be operated easily with gloved hands.

Ciri-ciri Utama

Flexible LDPE wall returns to shape after each squeeze

Bent nozzle directs solution toward confined surfaces or containers

One-piece closure and nozzle reduce detachable components

Secure draw tube supports smooth, low-sputter flow

Translucent body makes remaining liquid easy to estimate

Kebimbangan Produk Pelanggan

Squeeze-bottle performance depends on an unobstructed nozzle, an airtight closure and a correctly seated draw tube. Aggressive liquids or excessive tip cutting can change flow and containment.

A loose closure can draw air and interrupt the stream.Tighten the threaded closure evenly and inspect the neck seal.

A blocked or damaged nozzle can cause unpredictable discharge.Keep the tip capped or protected and replace damaged closures.

The draw tube may lift away from the lowest part of the bottle.Specify the tube length for the selected bottle capacity.

Refilled bottles may retain incompatible residue.Dedicate each bottle to one solution or use a validated cleaning cycle.

Permohonan yang biasa

For precision rinsing, wetting cleanroom wipes, adding high-purity water, applying compatible solvents and dispensing laboratory working solutions in controlled areas.

Parameter teknikal

These ranges cover common 125-1000 mL LDPE wash and squeeze bottles. Final tip bore, closure color, tube length and resin should match the required liquid and flow rate.

Bahan Teras	Flexible LDPE bottle with PP closure and PPCO or PE draw tube
Ketebalan Panel	0.7-1.5 mm nominal bottle wall
Lebar berkesan	45-95 mm bottle diameter
Panjang maksimum	230 mm overall height with nozzle
Keluli Menghadapi Ketebalan	0 mm; all-polymer dispenser
Ketumpatan teras	910-940 kg/m³ LDPE bottle
Kekonduksian Terma	0.31-0.36 W/(m·K), typical LDPE range
Kemasan permukaan	Smooth natural translucent body with white nozzle closure
Jenis Bersatu	Threaded closure with integrated bent nozzle and internal draw tube
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

125-1000 mL capacitiesNatural translucent or opaque LDPE bodyStraight, bent or color-coded nozzleNarrow or enlarged tip boreProtective nozzle capClean double-bagged presentation

Planning a Cleanroom Squeeze Bottle specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami