İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri
Temiz Oda Squeeze Şişesi
Flexible translucent LDPE cleanroom squeeze bottle with a white polypropylene closure, integrated bent nozzle and full-length draw tube.
- Flexible LDPE body provides controlled one-handed dispensing
- Integrated bent nozzle directs a smooth rinse stream
- Tight draw-tube connection limits sputtering and separation
Ürün tanıtımı
The Cleanroom Squeeze Bottle is a soft-sided cylindrical dispenser designed to deliver a controlled liquid stream when the body is compressed. Its polypropylene screw closure incorporates a bent nozzle, and the internal draw tube reaches toward the bottle base. The compact assembly contains no separate trigger mechanism and can be operated easily with gloved hands.
Ana Özellikler
Bent nozzle directs solution toward confined surfaces or containers
One-piece closure and nozzle reduce detachable components
Secure draw tube supports smooth, low-sputter flow
Translucent body makes remaining liquid easy to estimate
Müşteri Ürün Sorunları
Squeeze-bottle performance depends on an unobstructed nozzle, an airtight closure and a correctly seated draw tube. Aggressive liquids or excessive tip cutting can change flow and containment.
A loose closure can draw air and interrupt the stream.Tighten the threaded closure evenly and inspect the neck seal.
A blocked or damaged nozzle can cause unpredictable discharge.Keep the tip capped or protected and replace damaged closures.
The draw tube may lift away from the lowest part of the bottle.Specify the tube length for the selected bottle capacity.
Refilled bottles may retain incompatible residue.Dedicate each bottle to one solution or use a validated cleaning cycle.
Tipik uygulamalar
For precision rinsing, wetting cleanroom wipes, adding high-purity water, applying compatible solvents and dispensing laboratory working solutions in controlled areas.
Teknik parametreler
These ranges cover common 125-1000 mL LDPE wash and squeeze bottles. Final tip bore, closure color, tube length and resin should match the required liquid and flow rate.
| Temel malzemeler | Flexible LDPE bottle with PP closure and PPCO or PE draw tube |
|---|---|
| Panel kalınlığı | 0.7-1.5 mm nominal bottle wall |
| Effective Width (Etkili Genişlik) | 45-95 mm bottle diameter |
| Maksimum uzunluk | 230 mm overall height with nozzle |
| Çelik yüz yüze kalınlığı | 0 mm; all-polymer dispenser |
| Core Density (Çekirdek Yoğunluğu) | 910-940 kg/m³ LDPE bottle |
| Termal İletkenlik | 0.31-0.36 W/(m·K), typical LDPE range |
| Yüzey bitirme | Smooth natural translucent body with white nozzle closure |
| Ortak tip | Threaded closure with integrated bent nozzle and internal draw tube |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
125-1000 mL capacitiesNatural translucent or opaque LDPE bodyStraight, bent or color-coded nozzleNarrow or enlarged tip boreProtective nozzle capClean double-bagged presentation
Planning a Cleanroom Squeeze Bottle specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
