Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistema de piso para sala limpa
Cleanroom Rubber Sheet Flooring (em inglês)
A dense homogeneous rubber sheet floor that combines a nonporous cleanable surface with resilient underfoot comfort for controlled healthcare and laboratory interiors.
- Dense Vulcanized Rubber
- No Wax or Seal Coating
- Resilient Underfoot Comfort
- Optional Sealed Seams
Introdução do produto
Cleanroom rubber sheet flooring is produced from a homogeneous vulcanized rubber compound with stable color pigments and a dense, smooth wear surface. The elastic body reduces footfall noise and feels less rigid under prolonged standing than hard mineral finishes. Because the surface does not depend on a wax or field-applied coating, routine care can focus on soil removal rather than periodic stripping and resealing. Sheets may be installed with accurately cut butt joints or sealed with a compatible welding method where the room cleaning plan requires closed seams.
Características-chave
A dense nonporous surface is cleaned without a sacrificial wax, polish or permanent site-applied seal.
Rubber resilience reduces impact sound and improves standing comfort in occupied laboratory and care areas.
Smooth or low-reflection surfaces are available to balance cleanability, glare control and slip resistance.
Preocupações do produto do cliente
Occupied controlled areas often need a cleanable resilient surface without the coating maintenance and hard footfall of many conventional floors.
Frequent stripping and rewaxing disrupts laboratory access and introduces additional chemicals.The dense vulcanized rubber surface is maintained without a sacrificial wax or seal coat.
Hard flooring increases footfall noise and fatigue where staff stand for long periods.The resilient rubber body cushions steps and reduces transmitted walking noise.
Highly reflective floors create glare beneath strong task and cleanroom lighting.A matte or reflection-breaking surface controls sheen while retaining a closed finish.
Open butt seams are unsuitable for rooms using frequent wet disinfection.Compatible seam sealing and coved edge details can be included where the hygiene plan requires them.
Aplicações típicas
Cleanroom support laboratoriesHospital preparation and treatment areasResearch corridors and instrument roomsGowning and personnel circulation spacesPharmaceutical quality-control laboratories
Parâmetros técnicos
Typical construction data for homogeneous vulcanized rubber sheet flooring are listed below.
| Material principal | Homogeneous vulcanized rubber compound with mineral fillers and stable color pigments |
|---|---|
| Painel de espessura | 2.0 mm standard sheet thickness; 3.0 mm options available |
| Largura efetiva | 1220 mm standard sheet width |
| Comprimento máximo | Up to 15000 mm standard roll length at 2.0 mm thickness |
| Aço enfrentando espessura | 0 mm; homogeneous rubber flooring has no steel facing |
| Densidade Core | Approximately 1500–1700 kg/m³ for the dense vulcanized rubber compound |
| Condutividade térmica | Approximately 0.17 W/(m·K) for homogeneous rubber flooring |
| Superfície acabado | Smooth matte or reflection-breaking homogeneous rubber surface without factory wax |
| Tipo conjunto | Fully adhered precision-cut butt seams with optional compatible cold-weld or heat-weld sealing |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
2.0 mm or 3.0 mm sheet thicknessSmooth or low-reflection surfaceStandard, dissipative or acoustic rubber formulationMatching coved skirting and seam-sealing accessories
Planning a Cleanroom Rubber Sheet Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
