Neutral warm-gray cleanroom rubber sheet flooring roll with matching strip coil

クリーンルームフロアシステム

クリーンルームのゴムシートの床

A dense homogeneous rubber sheet floor that combines a nonporous cleanable surface with resilient underfoot comfort for controlled healthcare and laboratory interiors.

Dense Vulcanized Rubber
No Wax or Seal Coating
Resilient Underfoot Comfort
Optional Sealed Seams

見積もりリクエスト製品案内

商品紹介

Cleanroom rubber sheet flooring is produced from a homogeneous vulcanized rubber compound with stable color pigments and a dense, smooth wear surface. The elastic body reduces footfall noise and feels less rigid under prolonged standing than hard mineral finishes. Because the surface does not depend on a wax or field-applied coating, routine care can focus on soil removal rather than periodic stripping and resealing. Sheets may be installed with accurately cut butt joints or sealed with a compatible welding method where the room cleaning plan requires closed seams.

主要な特徴

The homogeneous rubber compound provides consistent material through the full 2 mm thickness.

A dense nonporous surface is cleaned without a sacrificial wax, polish or permanent site-applied seal.

Rubber resilience reduces impact sound and improves standing comfort in occupied laboratory and care areas.

Smooth or low-reflection surfaces are available to balance cleanability, glare control and slip resistance.

お客様の製品に関する懸念事項

Occupied controlled areas often need a cleanable resilient surface without the coating maintenance and hard footfall of many conventional floors.

Frequent stripping and rewaxing disrupts laboratory access and introduces additional chemicals.The dense vulcanized rubber surface is maintained without a sacrificial wax or seal coat.

Hard flooring increases footfall noise and fatigue where staff stand for long periods.The resilient rubber body cushions steps and reduces transmitted walking noise.

Highly reflective floors create glare beneath strong task and cleanroom lighting.A matte or reflection-breaking surface controls sheen while retaining a closed finish.

Open butt seams are unsuitable for rooms using frequent wet disinfection.Compatible seam sealing and coved edge details can be included where the hygiene plan requires them.

典型的な用途

Cleanroom support laboratoriesHospital preparation and treatment areasResearch corridors and instrument roomsGowning and personnel circulation spacesPharmaceutical quality-control laboratories

技術的なパラメータ

Typical construction data for homogeneous vulcanized rubber sheet flooring are listed below.

コア材料	Homogeneous vulcanized rubber compound with mineral fillers and stable color pigments
パネルの厚さ	2.0 mm standard sheet thickness; 3.0 mm options available
有効幅	1220 mm standard sheet width
最大長さ	Up to 15000 mm standard roll length at 2.0 mm thickness
鋼鉄の厚さを直面する	0 mm; homogeneous rubber flooring has no steel facing
コア密度	Approximately 1500–1700 kg/m³ for the dense vulcanized rubber compound
熱伝導率	Approximately 0.17 W/(m·K) for homogeneous rubber flooring
表面仕上げ	Smooth matte or reflection-breaking homogeneous rubber surface without factory wax
ジョイントタイプ	Fully adhered precision-cut butt seams with optional compatible cold-weld or heat-weld sealing
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

2.0 mm or 3.0 mm sheet thicknessSmooth or low-reflection surfaceStandard, dissipative or acoustic rubber formulationMatching coved skirting and seam-sealing accessories

Planning a Cleanroom Rubber Sheet Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する