English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
غرفة نظيفة المطاط ورقة الأرضيات
A dense homogeneous rubber sheet floor that combines a nonporous cleanable surface with resilient underfoot comfort for controlled healthcare and laboratory interiors.
- Dense Vulcanized Rubber
- No Wax or Seal Coating
- Resilient Underfoot Comfort
- Optional Sealed Seams
مقدمة المنتج
Cleanroom rubber sheet flooring is produced from a homogeneous vulcanized rubber compound with stable color pigments and a dense, smooth wear surface. The elastic body reduces footfall noise and feels less rigid under prolonged standing than hard mineral finishes. Because the surface does not depend on a wax or field-applied coating, routine care can focus on soil removal rather than periodic stripping and resealing. Sheets may be installed with accurately cut butt joints or sealed with a compatible welding method where the room cleaning plan requires closed seams.
الخصائص الرئيسية
A dense nonporous surface is cleaned without a sacrificial wax, polish or permanent site-applied seal.
Rubber resilience reduces impact sound and improves standing comfort in occupied laboratory and care areas.
Smooth or low-reflection surfaces are available to balance cleanability, glare control and slip resistance.
مخاوف المنتج للعملاء
Occupied controlled areas often need a cleanable resilient surface without the coating maintenance and hard footfall of many conventional floors.
Frequent stripping and rewaxing disrupts laboratory access and introduces additional chemicals.The dense vulcanized rubber surface is maintained without a sacrificial wax or seal coat.
Hard flooring increases footfall noise and fatigue where staff stand for long periods.The resilient rubber body cushions steps and reduces transmitted walking noise.
Highly reflective floors create glare beneath strong task and cleanroom lighting.A matte or reflection-breaking surface controls sheen while retaining a closed finish.
Open butt seams are unsuitable for rooms using frequent wet disinfection.Compatible seam sealing and coved edge details can be included where the hygiene plan requires them.
تطبيقات نموذجية
Cleanroom support laboratoriesHospital preparation and treatment areasResearch corridors and instrument roomsGowning and personnel circulation spacesPharmaceutical quality-control laboratories
المعلمات الفنية
Typical construction data for homogeneous vulcanized rubber sheet flooring are listed below.
| المواد الأساسية | Homogeneous vulcanized rubber compound with mineral fillers and stable color pigments |
|---|---|
| سمك اللوحة | 2.0 mm standard sheet thickness; 3.0 mm options available |
| العرض الفعال | 1220 mm standard sheet width |
| الحد الأقصى الطول | Up to 15000 mm standard roll length at 2.0 mm thickness |
| الصلب يواجه سمك | 0 mm; homogeneous rubber flooring has no steel facing |
| الكثافة الأساسية | Approximately 1500–1700 kg/m³ for the dense vulcanized rubber compound |
| الموصلية الحرارية | Approximately 0.17 W/(m·K) for homogeneous rubber flooring |
| إنهاء السطح | Smooth matte or reflection-breaking homogeneous rubber surface without factory wax |
| نوع المشترك | Fully adhered precision-cut butt seams with optional compatible cold-weld or heat-weld sealing |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
2.0 mm or 3.0 mm sheet thicknessSmooth or low-reflection surfaceStandard, dissipative or acoustic rubber formulationMatching coved skirting and seam-sealing accessories
Planning a Cleanroom Rubber Sheet Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
