Neutral warm-gray cleanroom rubber sheet flooring roll with matching strip coil

클린룸 바닥 시스템

클린룸 고무 시트 바닥

A dense homogeneous rubber sheet floor that combines a nonporous cleanable surface with resilient underfoot comfort for controlled healthcare and laboratory interiors.

Dense Vulcanized Rubber
No Wax or Seal Coating
Resilient Underfoot Comfort
Optional Sealed Seams

견적 요청 제품 찾아보기

상품 소개

Cleanroom rubber sheet flooring is produced from a homogeneous vulcanized rubber compound with stable color pigments and a dense, smooth wear surface. The elastic body reduces footfall noise and feels less rigid under prolonged standing than hard mineral finishes. Because the surface does not depend on a wax or field-applied coating, routine care can focus on soil removal rather than periodic stripping and resealing. Sheets may be installed with accurately cut butt joints or sealed with a compatible welding method where the room cleaning plan requires closed seams.

주요 기능

The homogeneous rubber compound provides consistent material through the full 2 mm thickness.

A dense nonporous surface is cleaned without a sacrificial wax, polish or permanent site-applied seal.

Rubber resilience reduces impact sound and improves standing comfort in occupied laboratory and care areas.

Smooth or low-reflection surfaces are available to balance cleanability, glare control and slip resistance.

고객 제품 관심사

Occupied controlled areas often need a cleanable resilient surface without the coating maintenance and hard footfall of many conventional floors.

Frequent stripping and rewaxing disrupts laboratory access and introduces additional chemicals.The dense vulcanized rubber surface is maintained without a sacrificial wax or seal coat.

Hard flooring increases footfall noise and fatigue where staff stand for long periods.The resilient rubber body cushions steps and reduces transmitted walking noise.

Highly reflective floors create glare beneath strong task and cleanroom lighting.A matte or reflection-breaking surface controls sheen while retaining a closed finish.

Open butt seams are unsuitable for rooms using frequent wet disinfection.Compatible seam sealing and coved edge details can be included where the hygiene plan requires them.

일반적인 응용 프로그램

Cleanroom support laboratoriesHospital preparation and treatment areasResearch corridors and instrument roomsGowning and personnel circulation spacesPharmaceutical quality-control laboratories

기술 매개변수

Typical construction data for homogeneous vulcanized rubber sheet flooring are listed below.

핵심 재료	Homogeneous vulcanized rubber compound with mineral fillers and stable color pigments
패널 두께	2.0 mm standard sheet thickness; 3.0 mm options available
유효 폭	1220 mm standard sheet width
최대 길이	Up to 15000 mm standard roll length at 2.0 mm thickness
강철 면면 두께	0 mm; homogeneous rubber flooring has no steel facing
코어 밀도	Approximately 1500–1700 kg/m³ for the dense vulcanized rubber compound
열전도도 (Thermal Conductivity)	Approximately 0.17 W/(m·K) for homogeneous rubber flooring
표면 마무리	Smooth matte or reflection-breaking homogeneous rubber surface without factory wax
접합 유형	Fully adhered precision-cut butt seams with optional compatible cold-weld or heat-weld sealing
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

2.0 mm or 3.0 mm sheet thicknessSmooth or low-reflection surfaceStandard, dissipative or acoustic rubber formulationMatching coved skirting and seam-sealing accessories

Planning a Cleanroom Rubber Sheet Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.