Cleanroom PA speaker with square white flush grille and sealed back can

Iluminação de sala limpa e equipamentos elétricos

Cleanroom PA alto-falante

A flush ceiling or wall loudspeaker with a smooth protected face for announcements, alarms and production paging.

Flush Cleanable Speaker Face
Sealed Protective Back Can
Wide Speech Coverage
Line Transformer Option

Introdução do produto

The cleanroom PA speaker mounts into a ceiling or wall panel with a gasketed flange and sealed rear can. A flat perforated stainless grille, acoustically transparent membrane or protected microperforated face distributes sound without exposing the cone and terminals. Transformer taps support distributed 70/100 V lines, while a low-impedance version serves local intercom or paging zones.

Características-chave

The room-facing grille is flat and removable only with retained tools.

A sealed back can protects the driver from plenum dust and condensation.

Wide dispersion reduces loud and quiet spots between adjacent speakers.

Transformer taps match output level to the paging zone design.

A perimeter gasket closes the speaker flange to the ceiling panel.

Preocupações do produto do cliente

A speaker must release sound efficiently while its cone, wiring and ceiling cutout remain protected from the controlled room.

An open speaker cone collects dust and cleaning mist.A protected acoustic face and sealed rear can isolate the driver.

Narrow dispersion leaves announcements unclear between devices.A wide-coverage driver distributes speech more evenly over the zone.

A ceiling cutout leaks around the speaker frame.The overlapping flange compresses a continuous panel gasket.

Different zones require different sound levels on one line.Selectable transformer taps set local speaker power without separate amplifiers.

Aplicações típicas

Cleanroom announcementsEmergency voice messagesShift and process pagingAirlock communication zones

Parâmetros técnicos

Typical configurable construction ranges for a cleanroom PA speaker are listed below.

Material principal	Steel or ABS back can with dynamic loudspeaker, line transformer and stainless or coated acoustic face
Painel de espessura	80-180 mm recessed speaker and back-can depth
Largura efetiva	160-300 mm visible grille diameter or width
Comprimento máximo	Up to 320 mm overall speaker assembly dimension
Aço enfrentando espessura	0.8-1.5 mm stainless or coated room-side grille and back can
Densidade Core	Approximately 1200-1400 kg/m³ for the flame-retardant polymer baffle components
Condutividade térmica	0.20-0.35 W/(m·K) for the polymer baffle
Superfície acabado	White powder-coated or fine-brushed stainless face with white or black protected acoustic membrane
Tipo conjunto	Gasketed flush flange with retained acoustic grille, sealed back can and terminal entry gland
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Ceiling or wall mount70/100 V transformer or low impedanceRound or square faceWhite coated or stainless grille

Planning a Cleanroom PA Speaker specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe