Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Cleanroom Speaker
A flush ceiling or wall loudspeaker with a smooth protected face for announcements, alarms and production paging.
- Flush Cleanable Speaker Face
- Sealed Protective Back Can
- Wide Speech Coverage
- Line Transformer Option
Introduction de produit
The cleanroom PA speaker mounts into a ceiling or wall panel with a gasketed flange and sealed rear can. A flat perforated stainless grille, acoustically transparent membrane or protected microperforated face distributes sound without exposing the cone and terminals. Transformer taps support distributed 70/100 V lines, while a low-impedance version serves local intercom or paging zones.
Key Features
A sealed back can protects the driver from plenum dust and condensation.
Wide dispersion reduces loud and quiet spots between adjacent speakers.
Transformer taps match output level to the paging zone design.
A perimeter gasket closes the speaker flange to the ceiling panel.
Préoccupations du client produit
A speaker must release sound efficiently while its cone, wiring and ceiling cutout remain protected from the controlled room.
An open speaker cone collects dust and cleaning mist.A protected acoustic face and sealed rear can isolate the driver.
Narrow dispersion leaves announcements unclear between devices.A wide-coverage driver distributes speech more evenly over the zone.
A ceiling cutout leaks around the speaker frame.The overlapping flange compresses a continuous panel gasket.
Different zones require different sound levels on one line.Selectable transformer taps set local speaker power without separate amplifiers.
Les applications typiques
Cleanroom announcementsEmergency voice messagesShift and process pagingAirlock communication zones
Paramètres techniques
Typical configurable construction ranges for a cleanroom PA speaker are listed below.
| Matériaux de base | Steel or ABS back can with dynamic loudspeaker, line transformer and stainless or coated acoustic face |
|---|---|
| Panneau épaisseur | 80-180 mm recessed speaker and back-can depth |
| Largeur effective | 160-300 mm visible grille diameter or width |
| Longueur maximale | Up to 320 mm overall speaker assembly dimension |
| Acier face épaisseur | 0.8-1.5 mm stainless or coated room-side grille and back can |
| Densité Core | Approximately 1200-1400 kg/m³ for the flame-retardant polymer baffle components |
| Conductivité thermique | 0.20-0.35 W/(m·K) for the polymer baffle |
| surface finie | White powder-coated or fine-brushed stainless face with white or black protected acoustic membrane |
| Type joint | Gasketed flush flange with retained acoustic grille, sealed back can and terminal entry gland |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Ceiling or wall mount70/100 V transformer or low impedanceRound or square faceWhite coated or stainless grille
Planning a Cleanroom PA Speaker specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
