Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Habitación limpia PA Speaker
A flush ceiling or wall loudspeaker with a smooth protected face for announcements, alarms and production paging.
- Flush Cleanable Speaker Face
- Sealed Protective Back Can
- Wide Speech Coverage
- Line Transformer Option
Introducción del producto
The cleanroom PA speaker mounts into a ceiling or wall panel with a gasketed flange and sealed rear can. A flat perforated stainless grille, acoustically transparent membrane or protected microperforated face distributes sound without exposing the cone and terminals. Transformer taps support distributed 70/100 V lines, while a low-impedance version serves local intercom or paging zones.
Características clave
A sealed back can protects the driver from plenum dust and condensation.
Wide dispersion reduces loud and quiet spots between adjacent speakers.
Transformer taps match output level to the paging zone design.
A perimeter gasket closes the speaker flange to the ceiling panel.
Preocupaciones del producto del cliente
A speaker must release sound efficiently while its cone, wiring and ceiling cutout remain protected from the controlled room.
An open speaker cone collects dust and cleaning mist.A protected acoustic face and sealed rear can isolate the driver.
Narrow dispersion leaves announcements unclear between devices.A wide-coverage driver distributes speech more evenly over the zone.
A ceiling cutout leaks around the speaker frame.The overlapping flange compresses a continuous panel gasket.
Different zones require different sound levels on one line.Selectable transformer taps set local speaker power without separate amplifiers.
Aplicaciones típicas
Cleanroom announcementsEmergency voice messagesShift and process pagingAirlock communication zones
Parámetros técnicos
Typical configurable construction ranges for a cleanroom PA speaker are listed below.
| Materiales Core | Steel or ABS back can with dynamic loudspeaker, line transformer and stainless or coated acoustic face |
|---|---|
| Panel de espesor | 80-180 mm recessed speaker and back-can depth |
| Ancho efectivo | 160-300 mm visible grille diameter or width |
| Longitud máxima | Up to 320 mm overall speaker assembly dimension |
| Acero frente a espesor | 0.8-1.5 mm stainless or coated room-side grille and back can |
| Densidad Core | Approximately 1200-1400 kg/m³ for the flame-retardant polymer baffle components |
| Conductividad térmica | 0.20-0.35 W/(m·K) for the polymer baffle |
| Superficie acabada | White powder-coated or fine-brushed stainless face with white or black protected acoustic membrane |
| Tipo conjunto | Gasketed flush flange with retained acoustic grille, sealed back can and terminal entry gland |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Ceiling or wall mount70/100 V transformer or low impedanceRound or square faceWhite coated or stainless grille
Planning a Cleanroom PA Speaker specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
