Temiz Oda Ekipmanları ve Aseptik Tesis Temelleri için Tek Duraklı TedarikçinizUluslararası Proje Destekleri
Open mobile navigationClose mobile navigation
Temiz Oda Aydınlatma ve Elektrik Ekipmanları

Temizlik Oda Speaker

A flush ceiling or wall loudspeaker with a smooth protected face for announcements, alarms and production paging.
  • Flush Cleanable Speaker Face
  • Sealed Protective Back Can
  • Wide Speech Coverage
  • Line Transformer Option
Alıntı isteği Browse ürünleri

Ürün tanıtımı

The cleanroom PA speaker mounts into a ceiling or wall panel with a gasketed flange and sealed rear can. A flat perforated stainless grille, acoustically transparent membrane or protected microperforated face distributes sound without exposing the cone and terminals. Transformer taps support distributed 70/100 V lines, while a low-impedance version serves local intercom or paging zones.

Ana Özellikler

The room-facing grille is flat and removable only with retained tools.

A sealed back can protects the driver from plenum dust and condensation.

Wide dispersion reduces loud and quiet spots between adjacent speakers.

Transformer taps match output level to the paging zone design.

A perimeter gasket closes the speaker flange to the ceiling panel.

Müşteri Ürün Sorunları

A speaker must release sound efficiently while its cone, wiring and ceiling cutout remain protected from the controlled room.

An open speaker cone collects dust and cleaning mist.A protected acoustic face and sealed rear can isolate the driver.
Narrow dispersion leaves announcements unclear between devices.A wide-coverage driver distributes speech more evenly over the zone.
A ceiling cutout leaks around the speaker frame.The overlapping flange compresses a continuous panel gasket.
Different zones require different sound levels on one line.Selectable transformer taps set local speaker power without separate amplifiers.

Tipik uygulamalar

Cleanroom announcementsEmergency voice messagesShift and process pagingAirlock communication zones

Teknik parametreler

Typical configurable construction ranges for a cleanroom PA speaker are listed below.

Temel malzemelerSteel or ABS back can with dynamic loudspeaker, line transformer and stainless or coated acoustic face
Panel kalınlığı80-180 mm recessed speaker and back-can depth
Effective Width (Etkili Genişlik)160-300 mm visible grille diameter or width
Maksimum uzunlukUp to 320 mm overall speaker assembly dimension
Çelik yüz yüze kalınlığı0.8-1.5 mm stainless or coated room-side grille and back can
Core Density (Çekirdek Yoğunluğu)Approximately 1200-1400 kg/m³ for the flame-retardant polymer baffle components
Termal İletkenlik0.20-0.35 W/(m·K) for the polymer baffle
Yüzey bitirmeWhite powder-coated or fine-brushed stainless face with white or black protected acoustic membrane
Ortak tipGasketed flush flange with retained acoustic grille, sealed back can and terminal entry gland
Customization (Özelleşme)Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Ceiling or wall mount70/100 V transformer or low impedanceRound or square faceWhite coated or stainless grille

Planning a Cleanroom PA Speaker specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun
E-posta Bize whatsapp WeChat

Ana Sayfa

Ürünler

Haberler

Hakkımızda

İletişim