Type 316L cleanroom goggle washing sink with blue mesh baskets

Móveis de sala limpa e produtos de aço inoxidável

Cleanroom Goggle Lavagem Sink

A Type 316L manual goggle-cleaning station with a divided coved bowl, removable blue mesh baskets, low-pressure rinse spray, lens-separation rack and protected filtered-air manifold.

Separated wash and rinse zones
Blue soft-mesh goggle baskets
Low-pressure fan rinse spray
Protected filtered-air manifold

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom goggle washing sink organizes manual processing of reusable protective eyewear without confusing the station with an emergency eyewash. A central divider separates detergent wash from low-pressure rinse water. Two removable blue polymer mesh baskets prevent lenses from contacting the stainless bowl, while a silicone-coated rack holds goggles individually during inspection and draining. The side-mounted fan spray controls rinse impact, and a guarded filtered-air manifold assists surface water removal without directing an exposed high-velocity nozzle at the lenses.

Características-chave

A fixed center divider separates detergent washing from the final low-pressure rinse zone.

Soft blue mesh baskets support goggles without metal-to-lens contact and lift out for batch transfer.

Silicone-coated separators hold individual goggles apart so straps and lenses remain visible during inspection.

A perforated guard distributes filtered drying air across the rack rather than concentrating it at one lens.

Preocupações do produto do cliente

Reusable goggles need gentle separation through washing, rinsing and draining so lenses are not scratched, straps do not tangle and residual liquid is not trapped under stacked eyewear.

Loose goggles rub against a stainless bowl and scratch coated lenses.Removable soft blue mesh baskets isolate the eyewear from hard wetted surfaces.

Wash chemistry carries into the final rinse when every step uses one undivided basin.The welded center divider creates distinct wash and low-pressure rinse zones.

Nested goggles retain liquid between lenses, frames and elastic straps.The silicone-coated separation rack holds each item open and individually spaced.

A concentrated air jet lifts lightweight eyewear or damages anti-fog coatings.The guarded perforated manifold distributes low-pressure filtered air over the whole rack.

Aplicações típicas

Reusable cleanroom goggle processingControlled-environment eyewear change roomsPharmaceutical laundry supportBiotechnology PPE preparationHigh-care eye-protection wash areas

Parâmetros técnicos

Typical configurable specifications for a manual cleanroom goggle washing sink are listed below.

Material principal	Type 316L stainless divided wash bowl with blue polypropylene mesh baskets and silicone-coated stainless goggle rack
Painel de espessura	1.5 mm welded bowl, divider, splashback and enclosed service panel
Largura efetiva	1000 mm overall wash-and-rinse working width
Comprimento máximo	600 mm maximum front-to-back sink depth
Aço enfrentando espessura	1.5 mm Type 316L stainless wetted surfaces
Densidade Core	7950–8050 kg/m³ for Type 316L stainless steel
Condutividade térmica	13–16 W/(m·K) for Type 316L stainless steel
Superfície acabado	Satin-brushed exterior, smooth coved bowl, blue soft-mesh baskets and silicone-coated separators
Tipo conjunto	Fully welded divided bowl with quick-lift baskets, low-pressure fan-rinse connection, guarded air manifold and twin 38 mm wastes
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Anti-fog dosing cupHeated purified-water rinseTimed filtered-air supplyAdditional removable goggle rack

Planning a Cleanroom Goggle Washing Sink specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe