Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Muebles de sala limpia y productos de acero inoxidable
Cleanroom Goggle lavabos
A Type 316L manual goggle-cleaning station with a divided coved bowl, removable blue mesh baskets, low-pressure rinse spray, lens-separation rack and protected filtered-air manifold.
- Separated wash and rinse zones
- Blue soft-mesh goggle baskets
- Low-pressure fan rinse spray
- Protected filtered-air manifold
Introducción del producto
The cleanroom goggle washing sink organizes manual processing of reusable protective eyewear without confusing the station with an emergency eyewash. A central divider separates detergent wash from low-pressure rinse water. Two removable blue polymer mesh baskets prevent lenses from contacting the stainless bowl, while a silicone-coated rack holds goggles individually during inspection and draining. The side-mounted fan spray controls rinse impact, and a guarded filtered-air manifold assists surface water removal without directing an exposed high-velocity nozzle at the lenses.
Características clave
Soft blue mesh baskets support goggles without metal-to-lens contact and lift out for batch transfer.
Silicone-coated separators hold individual goggles apart so straps and lenses remain visible during inspection.
A perforated guard distributes filtered drying air across the rack rather than concentrating it at one lens.
Preocupaciones del producto del cliente
Reusable goggles need gentle separation through washing, rinsing and draining so lenses are not scratched, straps do not tangle and residual liquid is not trapped under stacked eyewear.
Loose goggles rub against a stainless bowl and scratch coated lenses.Removable soft blue mesh baskets isolate the eyewear from hard wetted surfaces.
Wash chemistry carries into the final rinse when every step uses one undivided basin.The welded center divider creates distinct wash and low-pressure rinse zones.
Nested goggles retain liquid between lenses, frames and elastic straps.The silicone-coated separation rack holds each item open and individually spaced.
A concentrated air jet lifts lightweight eyewear or damages anti-fog coatings.The guarded perforated manifold distributes low-pressure filtered air over the whole rack.
Aplicaciones típicas
Reusable cleanroom goggle processingControlled-environment eyewear change roomsPharmaceutical laundry supportBiotechnology PPE preparationHigh-care eye-protection wash areas
Parámetros técnicos
Typical configurable specifications for a manual cleanroom goggle washing sink are listed below.
| Materiales Core | Type 316L stainless divided wash bowl with blue polypropylene mesh baskets and silicone-coated stainless goggle rack |
|---|---|
| Panel de espesor | 1.5 mm welded bowl, divider, splashback and enclosed service panel |
| Ancho efectivo | 1000 mm overall wash-and-rinse working width |
| Longitud máxima | 600 mm maximum front-to-back sink depth |
| Acero frente a espesor | 1.5 mm Type 316L stainless wetted surfaces |
| Densidad Core | 7950–8050 kg/m³ for Type 316L stainless steel |
| Conductividad térmica | 13–16 W/(m·K) for Type 316L stainless steel |
| Superficie acabada | Satin-brushed exterior, smooth coved bowl, blue soft-mesh baskets and silicone-coated separators |
| Tipo conjunto | Fully welded divided bowl with quick-lift baskets, low-pressure fan-rinse connection, guarded air manifold and twin 38 mm wastes |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Anti-fog dosing cupHeated purified-water rinseTimed filtered-air supplyAdditional removable goggle rack
Planning a Cleanroom Goggle Washing Sink specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
