Type 316L cleanroom goggle washing sink with blue mesh baskets

클린룸 가구 및 스테인레스 스틸 제품

클린룸 Goggle Washing Sink

A Type 316L manual goggle-cleaning station with a divided coved bowl, removable blue mesh baskets, low-pressure rinse spray, lens-separation rack and protected filtered-air manifold.

Separated wash and rinse zones
Blue soft-mesh goggle baskets
Low-pressure fan rinse spray
Protected filtered-air manifold

견적 요청 제품 찾아보기

상품 소개

The cleanroom goggle washing sink organizes manual processing of reusable protective eyewear without confusing the station with an emergency eyewash. A central divider separates detergent wash from low-pressure rinse water. Two removable blue polymer mesh baskets prevent lenses from contacting the stainless bowl, while a silicone-coated rack holds goggles individually during inspection and draining. The side-mounted fan spray controls rinse impact, and a guarded filtered-air manifold assists surface water removal without directing an exposed high-velocity nozzle at the lenses.

주요 기능

A fixed center divider separates detergent washing from the final low-pressure rinse zone.

Soft blue mesh baskets support goggles without metal-to-lens contact and lift out for batch transfer.

Silicone-coated separators hold individual goggles apart so straps and lenses remain visible during inspection.

A perforated guard distributes filtered drying air across the rack rather than concentrating it at one lens.

고객 제품 관심사

Reusable goggles need gentle separation through washing, rinsing and draining so lenses are not scratched, straps do not tangle and residual liquid is not trapped under stacked eyewear.

Loose goggles rub against a stainless bowl and scratch coated lenses.Removable soft blue mesh baskets isolate the eyewear from hard wetted surfaces.

Wash chemistry carries into the final rinse when every step uses one undivided basin.The welded center divider creates distinct wash and low-pressure rinse zones.

Nested goggles retain liquid between lenses, frames and elastic straps.The silicone-coated separation rack holds each item open and individually spaced.

A concentrated air jet lifts lightweight eyewear or damages anti-fog coatings.The guarded perforated manifold distributes low-pressure filtered air over the whole rack.

일반적인 응용 프로그램

Reusable cleanroom goggle processingControlled-environment eyewear change roomsPharmaceutical laundry supportBiotechnology PPE preparationHigh-care eye-protection wash areas

기술 매개변수

Typical configurable specifications for a manual cleanroom goggle washing sink are listed below.

핵심 재료	Type 316L stainless divided wash bowl with blue polypropylene mesh baskets and silicone-coated stainless goggle rack
패널 두께	1.5 mm welded bowl, divider, splashback and enclosed service panel
유효 폭	1000 mm overall wash-and-rinse working width
최대 길이	600 mm maximum front-to-back sink depth
강철 면면 두께	1.5 mm Type 316L stainless wetted surfaces
코어 밀도	7950–8050 kg/m³ for Type 316L stainless steel
열전도도 (Thermal Conductivity)	13–16 W/(m·K) for Type 316L stainless steel
표면 마무리	Satin-brushed exterior, smooth coved bowl, blue soft-mesh baskets and silicone-coated separators
접합 유형	Fully welded divided bowl with quick-lift baskets, low-pressure fan-rinse connection, guarded air manifold and twin 38 mm wastes
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Anti-fog dosing cupHeated purified-water rinseTimed filtered-air supplyAdditional removable goggle rack

Planning a Cleanroom Goggle Washing Sink specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.