Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Z Cleanroom Goggle lavabo
A Type 316L manual goggle-cleaning station with a divided coved bowl, removable blue mesh baskets, low-pressure rinse spray, lens-separation rack and protected filtered-air manifold.
- Separated wash and rinse zones
- Blue soft-mesh goggle baskets
- Low-pressure fan rinse spray
- Protected filtered-air manifold
Introduction de produit
The cleanroom goggle washing sink organizes manual processing of reusable protective eyewear without confusing the station with an emergency eyewash. A central divider separates detergent wash from low-pressure rinse water. Two removable blue polymer mesh baskets prevent lenses from contacting the stainless bowl, while a silicone-coated rack holds goggles individually during inspection and draining. The side-mounted fan spray controls rinse impact, and a guarded filtered-air manifold assists surface water removal without directing an exposed high-velocity nozzle at the lenses.
Key Features
Soft blue mesh baskets support goggles without metal-to-lens contact and lift out for batch transfer.
Silicone-coated separators hold individual goggles apart so straps and lenses remain visible during inspection.
A perforated guard distributes filtered drying air across the rack rather than concentrating it at one lens.
Préoccupations du client produit
Reusable goggles need gentle separation through washing, rinsing and draining so lenses are not scratched, straps do not tangle and residual liquid is not trapped under stacked eyewear.
Loose goggles rub against a stainless bowl and scratch coated lenses.Removable soft blue mesh baskets isolate the eyewear from hard wetted surfaces.
Wash chemistry carries into the final rinse when every step uses one undivided basin.The welded center divider creates distinct wash and low-pressure rinse zones.
Nested goggles retain liquid between lenses, frames and elastic straps.The silicone-coated separation rack holds each item open and individually spaced.
A concentrated air jet lifts lightweight eyewear or damages anti-fog coatings.The guarded perforated manifold distributes low-pressure filtered air over the whole rack.
Les applications typiques
Reusable cleanroom goggle processingControlled-environment eyewear change roomsPharmaceutical laundry supportBiotechnology PPE preparationHigh-care eye-protection wash areas
Paramètres techniques
Typical configurable specifications for a manual cleanroom goggle washing sink are listed below.
| Matériaux de base | Type 316L stainless divided wash bowl with blue polypropylene mesh baskets and silicone-coated stainless goggle rack |
|---|---|
| Panneau épaisseur | 1.5 mm welded bowl, divider, splashback and enclosed service panel |
| Largeur effective | 1000 mm overall wash-and-rinse working width |
| Longueur maximale | 600 mm maximum front-to-back sink depth |
| Acier face épaisseur | 1.5 mm Type 316L stainless wetted surfaces |
| Densité Core | 7950–8050 kg/m³ for Type 316L stainless steel |
| Conductivité thermique | 13–16 W/(m·K) for Type 316L stainless steel |
| surface finie | Satin-brushed exterior, smooth coved bowl, blue soft-mesh baskets and silicone-coated separators |
| Type joint | Fully welded divided bowl with quick-lift baskets, low-pressure fan-rinse connection, guarded air manifold and twin 38 mm wastes |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Anti-fog dosing cupHeated purified-water rinseTimed filtered-air supplyAdditional removable goggle rack
Planning a Cleanroom Goggle Washing Sink specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
