Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Z Gabinete de esterilização de vestuário de sala limpa
An enclosed Type 304L stainless cabinet with shielded UV-C lamps, separate hanging and footwear zones, an adjustable timer and door-activated lamp interlock.
- Shielded 253.7 nm UV-C lamps
- Door-activated lamp safety interlock
- Separate garment and footwear zones
- Adjustable cycle timer and status lights
Introdução do produto
The cleanroom garment sterilizing cabinet encloses hanging apparel and footwear inside an opaque Type 304L stainless chamber during a timed UV-C exposure cycle. Two guarded 253.7 nm lamp assemblies are positioned beside the hanging zone, while a perforated divider separates the lower footwear compartment without blocking reflected light. A door safety switch disconnects the lamps as either door opens. The flush blue control panel provides timer setting, cycle start, lamp status and an amber in-process indicator without placing exposed controls inside the treatment chamber. The cabinet interior uses polished stainless reflectors, a removable perforated shoe tray and a full-width hanger rail.
Características-chave
A hardwired door switch interrupts lamp power before an operator can access the treatment chamber.
The perforated lower divider keeps footwear separate while allowing light to reach the removable shoe tray.
The exterior timer, cycle switch and colored status indicators give operators a clear control point outside the opaque enclosure.
Preocupações do produto do cliente
UV-C garment treatment needs an enclosed, interlocked chamber that organizes clothing while controlling operator exposure and shadowed surfaces.
A single unguarded lamp leaves garment folds shadowed and exposes fragile tubes to contact.Opposed guarded lamp assemblies illuminate the hanging zone from both sides while protecting the tubes.
Opening a treatment cabinet during a running cycle can expose the operator to active UV-C light.A positive-action door safety switch removes lamp power as soon as either door releases.
Footwear placed beneath hanging garments blocks light and transfers residue to longer apparel.A perforated stainless divider creates a separate removable footwear tray below the hanging rail.
Operators cannot distinguish ready, active and interrupted cycles on cabinets with one unlabeled switch.Separate green ready, amber cycle and red fault indicators communicate operating state beside the digital timer.
Aplicações típicas
Reusable cleanroom garment treatmentPharmaceutical gowning supportMedical and laboratory coat sanitationFood-production protective clothing roomsClean footwear and accessory treatment
Parâmetros técnicos
Typical configurable specifications for an enclosed UV-C cleanroom garment sterilizing cabinet are listed below.
| Material principal | Type 304L stainless steel double-skin enclosure with two guarded 253.7 nm UV-C lamps, hanger rail and removable perforated footwear tray |
|---|---|
| Painel de espessura | 1.2–1.5 mm inner and outer stainless enclosure panels |
| Largura efetiva | 900–1100 mm overall cabinet width |
| Comprimento máximo | 2100 mm maximum cabinet height including status beacon |
| Aço enfrentando espessura | 1.2–1.5 mm Type 304L stainless inner chamber, doors and outer body |
| Densidade Core | 7900 - 8000 kg / m3 para aço inoxidável tipo 304L |
| Condutividade térmica | 14 - 16 W / (m · K) para aço inoxidável tipo 304L |
| Superfície acabado | Brushed exterior stainless with reflective polished interior, blue silicone door seals and blue flush control panel |
| Tipo conjunto | Continuously welded double-skin chamber with opaque gasketed doors, concealed hinges, compression latch and hardwired door interlock |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
0–60 minute digital or rotary cycle timerAdditional guarded lamp assembliesTop-mounted filtered-air circulation moduleType 316L electropolished treatment chamber
Planning a Cleanroom Garment Sterilizing Cabinet specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
