English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
Cleanroom الملابس تعقيم مجلس الوزراء
An enclosed Type 304L stainless cabinet with shielded UV-C lamps, separate hanging and footwear zones, an adjustable timer and door-activated lamp interlock.
- Shielded 253.7 nm UV-C lamps
- Door-activated lamp safety interlock
- Separate garment and footwear zones
- Adjustable cycle timer and status lights
مقدمة المنتج
The cleanroom garment sterilizing cabinet encloses hanging apparel and footwear inside an opaque Type 304L stainless chamber during a timed UV-C exposure cycle. Two guarded 253.7 nm lamp assemblies are positioned beside the hanging zone, while a perforated divider separates the lower footwear compartment without blocking reflected light. A door safety switch disconnects the lamps as either door opens. The flush blue control panel provides timer setting, cycle start, lamp status and an amber in-process indicator without placing exposed controls inside the treatment chamber. The cabinet interior uses polished stainless reflectors, a removable perforated shoe tray and a full-width hanger rail.
الخصائص الرئيسية
A hardwired door switch interrupts lamp power before an operator can access the treatment chamber.
The perforated lower divider keeps footwear separate while allowing light to reach the removable shoe tray.
The exterior timer, cycle switch and colored status indicators give operators a clear control point outside the opaque enclosure.
مخاوف المنتج للعملاء
UV-C garment treatment needs an enclosed, interlocked chamber that organizes clothing while controlling operator exposure and shadowed surfaces.
A single unguarded lamp leaves garment folds shadowed and exposes fragile tubes to contact.Opposed guarded lamp assemblies illuminate the hanging zone from both sides while protecting the tubes.
Opening a treatment cabinet during a running cycle can expose the operator to active UV-C light.A positive-action door safety switch removes lamp power as soon as either door releases.
Footwear placed beneath hanging garments blocks light and transfers residue to longer apparel.A perforated stainless divider creates a separate removable footwear tray below the hanging rail.
Operators cannot distinguish ready, active and interrupted cycles on cabinets with one unlabeled switch.Separate green ready, amber cycle and red fault indicators communicate operating state beside the digital timer.
تطبيقات نموذجية
Reusable cleanroom garment treatmentPharmaceutical gowning supportMedical and laboratory coat sanitationFood-production protective clothing roomsClean footwear and accessory treatment
المعلمات الفنية
Typical configurable specifications for an enclosed UV-C cleanroom garment sterilizing cabinet are listed below.
| المواد الأساسية | Type 304L stainless steel double-skin enclosure with two guarded 253.7 nm UV-C lamps, hanger rail and removable perforated footwear tray |
|---|---|
| سمك اللوحة | 1.2–1.5 mm inner and outer stainless enclosure panels |
| العرض الفعال | 900–1100 mm overall cabinet width |
| الحد الأقصى الطول | 2100 mm maximum cabinet height including status beacon |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304L stainless inner chamber, doors and outer body |
| الكثافة الأساسية | 7900–8000 kg/m³ for Type 304L stainless steel |
| الموصلية الحرارية | 14–16 W/(m·K) for Type 304L stainless steel |
| إنهاء السطح | Brushed exterior stainless with reflective polished interior, blue silicone door seals and blue flush control panel |
| نوع المشترك | Continuously welded double-skin chamber with opaque gasketed doors, concealed hinges, compression latch and hardwired door interlock |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
0–60 minute digital or rotary cycle timerAdditional guarded lamp assembliesTop-mounted filtered-air circulation moduleType 316L electropolished treatment chamber
Planning a Cleanroom Garment Sterilizing Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
