Stainless UV-C cleanroom garment sterilizing cabinet with control panel

클린룸 가구 및 스테인레스 스틸 제품

클린룸 의류 멸균 캐비닛

An enclosed Type 304L stainless cabinet with shielded UV-C lamps, separate hanging and footwear zones, an adjustable timer and door-activated lamp interlock.

Shielded 253.7 nm UV-C lamps
Door-activated lamp safety interlock
Separate garment and footwear zones
Adjustable cycle timer and status lights

견적 요청 제품 찾아보기

상품 소개

The cleanroom garment sterilizing cabinet encloses hanging apparel and footwear inside an opaque Type 304L stainless chamber during a timed UV-C exposure cycle. Two guarded 253.7 nm lamp assemblies are positioned beside the hanging zone, while a perforated divider separates the lower footwear compartment without blocking reflected light. A door safety switch disconnects the lamps as either door opens. The flush blue control panel provides timer setting, cycle start, lamp status and an amber in-process indicator without placing exposed controls inside the treatment chamber. The cabinet interior uses polished stainless reflectors, a removable perforated shoe tray and a full-width hanger rail.

주요 기능

Two guarded UV-C lamps illuminate opposite sides of the hanging zone to reduce deep shadowing around suspended garments.

A hardwired door switch interrupts lamp power before an operator can access the treatment chamber.

The perforated lower divider keeps footwear separate while allowing light to reach the removable shoe tray.

The exterior timer, cycle switch and colored status indicators give operators a clear control point outside the opaque enclosure.

고객 제품 관심사

UV-C garment treatment needs an enclosed, interlocked chamber that organizes clothing while controlling operator exposure and shadowed surfaces.

A single unguarded lamp leaves garment folds shadowed and exposes fragile tubes to contact.Opposed guarded lamp assemblies illuminate the hanging zone from both sides while protecting the tubes.

Opening a treatment cabinet during a running cycle can expose the operator to active UV-C light.A positive-action door safety switch removes lamp power as soon as either door releases.

Footwear placed beneath hanging garments blocks light and transfers residue to longer apparel.A perforated stainless divider creates a separate removable footwear tray below the hanging rail.

Operators cannot distinguish ready, active and interrupted cycles on cabinets with one unlabeled switch.Separate green ready, amber cycle and red fault indicators communicate operating state beside the digital timer.

일반적인 응용 프로그램

Reusable cleanroom garment treatmentPharmaceutical gowning supportMedical and laboratory coat sanitationFood-production protective clothing roomsClean footwear and accessory treatment

기술 매개변수

Typical configurable specifications for an enclosed UV-C cleanroom garment sterilizing cabinet are listed below.

핵심 재료	Type 304L stainless steel double-skin enclosure with two guarded 253.7 nm UV-C lamps, hanger rail and removable perforated footwear tray
패널 두께	1.2–1.5 mm inner and outer stainless enclosure panels
유효 폭	900–1100 mm overall cabinet width
최대 길이	2100 mm maximum cabinet height including status beacon
강철 면면 두께	1.2–1.5 mm Type 304L stainless inner chamber, doors and outer body
코어 밀도	7900–8000 kg/m³ for Type 304L stainless steel
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for Type 304L stainless steel
표면 마무리	Brushed exterior stainless with reflective polished interior, blue silicone door seals and blue flush control panel
접합 유형	Continuously welded double-skin chamber with opaque gasketed doors, concealed hinges, compression latch and hardwired door interlock
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

0–60 minute digital or rotary cycle timerAdditional guarded lamp assembliesTop-mounted filtered-air circulation moduleType 316L electropolished treatment chamber

Planning a Cleanroom Garment Sterilizing Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.