Stainless UV-C cleanroom garment sterilizing cabinet with control panel

クリーンルーム家具 · ステンレス製品

Cleanroom の衣料品の滅菌キャビネット

An enclosed Type 304L stainless cabinet with shielded UV-C lamps, separate hanging and footwear zones, an adjustable timer and door-activated lamp interlock.

Shielded 253.7 nm UV-C lamps
Door-activated lamp safety interlock
Separate garment and footwear zones
Adjustable cycle timer and status lights

見積もりリクエスト製品案内

商品紹介

The cleanroom garment sterilizing cabinet encloses hanging apparel and footwear inside an opaque Type 304L stainless chamber during a timed UV-C exposure cycle. Two guarded 253.7 nm lamp assemblies are positioned beside the hanging zone, while a perforated divider separates the lower footwear compartment without blocking reflected light. A door safety switch disconnects the lamps as either door opens. The flush blue control panel provides timer setting, cycle start, lamp status and an amber in-process indicator without placing exposed controls inside the treatment chamber. The cabinet interior uses polished stainless reflectors, a removable perforated shoe tray and a full-width hanger rail.

主要な特徴

Two guarded UV-C lamps illuminate opposite sides of the hanging zone to reduce deep shadowing around suspended garments.

A hardwired door switch interrupts lamp power before an operator can access the treatment chamber.

The perforated lower divider keeps footwear separate while allowing light to reach the removable shoe tray.

The exterior timer, cycle switch and colored status indicators give operators a clear control point outside the opaque enclosure.

お客様の製品に関する懸念事項

UV-C garment treatment needs an enclosed, interlocked chamber that organizes clothing while controlling operator exposure and shadowed surfaces.

A single unguarded lamp leaves garment folds shadowed and exposes fragile tubes to contact.Opposed guarded lamp assemblies illuminate the hanging zone from both sides while protecting the tubes.

Opening a treatment cabinet during a running cycle can expose the operator to active UV-C light.A positive-action door safety switch removes lamp power as soon as either door releases.

Footwear placed beneath hanging garments blocks light and transfers residue to longer apparel.A perforated stainless divider creates a separate removable footwear tray below the hanging rail.

Operators cannot distinguish ready, active and interrupted cycles on cabinets with one unlabeled switch.Separate green ready, amber cycle and red fault indicators communicate operating state beside the digital timer.

典型的な用途

Reusable cleanroom garment treatmentPharmaceutical gowning supportMedical and laboratory coat sanitationFood-production protective clothing roomsClean footwear and accessory treatment

技術的なパラメータ

Typical configurable specifications for an enclosed UV-C cleanroom garment sterilizing cabinet are listed below.

コア材料	Type 304L stainless steel double-skin enclosure with two guarded 253.7 nm UV-C lamps, hanger rail and removable perforated footwear tray
パネルの厚さ	1.2–1.5 mm inner and outer stainless enclosure panels
有効幅	900–1100 mm overall cabinet width
最大長さ	2100 mm maximum cabinet height including status beacon
鋼鉄の厚さを直面する	1.2–1.5 mm Type 304L stainless inner chamber, doors and outer body
コア密度	タイプ 304L のステンレス鋼のための 7900 — 8000 kg / m3
熱伝導率	Z タイプ 304L のステンレス鋼のための 14 — 16 W / （m · K）
表面仕上げ	Brushed exterior stainless with reflective polished interior, blue silicone door seals and blue flush control panel
ジョイントタイプ	Continuously welded double-skin chamber with opaque gasketed doors, concealed hinges, compression latch and hardwired door interlock
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

0–60 minute digital or rotary cycle timerAdditional guarded lamp assembliesTop-mounted filtered-air circulation moduleType 316L electropolished treatment chamber

Planning a Cleanroom Garment Sterilizing Cabinet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する