Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Cargo Douche à air de salle blanche
A reinforced material-transfer air shower that removes loose surface dust from carts, palletised loads and production equipment before clean-area entry.
- Wide Cargo Passage
- Side and Top Cleaning
- Flush Wheeled Route
- Heavy-Duty Returns
Introduction de produit
The cargo air shower is sized around material handling rather than a stationary operator. Sidewall jets, and optional roof jets, direct filtered air across trolley frames, cartons and equipment surfaces. A level reinforced floor supports wheeled transfer, while guarded low-level returns and larger prefilters accommodate the heavier fibres and warehouse dust commonly carried by incoming materials.
Key Features
Side and roof nozzle zones can clean vertical faces and upper load surfaces.
Lower impact protection guards returns from routine trolley contact.
Large-area prefilters are suited to coarse packaging fibres.
Large interlocked doors preserve the transfer boundary during the cleaning cycle.
Préoccupations du client produit
Material loads vary in height, shape and wheel loading, so the chamber must clean exposed surfaces without obstructing the transfer route.
Tall loads leave their upper surfaces outside sidewall airflow.Optional roof nozzles direct filtered air downward across load tops.
Raised thresholds impede pallet-jack movement.A flush reinforced floor maintains a smooth wheeled path.
Cart impacts damage exposed return grilles.Kick plates and protected inlet faces shield the low-level return sections.
Packaging debris clogs small personnel-air-shower filters.Expanded washable prefilter banks offer greater coarse-dust collection area.
Les applications typiques
Pharmaceutical material transferFood ingredient cart entryElectronics equipment move-inPackaging component decontamination
Paramètres techniques
Typical structural ranges for a cart and equipment cargo air shower are given below.
| Matériaux de base | Reinforced mineral-wool insulated steel enclosure with multi-side nozzle plenums, washable prefilters and H13 HEPA banks |
|---|---|
| Panneau épaisseur | 50-75 mm impact-reinforced wall and roof panels |
| Largeur effective | 1500-2500 mm clear cargo passage width |
| Longueur maximale | Up to 6000 mm modular cargo cleaning length |
| Acier face épaisseur | 1.2-1.5 mm steel facing with heavier stainless kick plates |
| Densité Core | 80-120 kg/m³ mineral-wool enclosure core |
| Conductivité thermique | 0.036-0.045 W/(m·K) for the mineral-wool panel construction |
| surface finie | Powder-coated upper panels with brushed stainless lower impact protection |
| Type joint | Bolted heavy-duty modular frame with flush floor joints and electrically interlocked cargo doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Swing, sliding or roll-up cargo doorsSide-plus-ceiling nozzle arrangementWheel guides and bumper railsPallet-jack or powered-cart clearances
Planning a Cargo Cleanroom Air Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
