Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Z Porta de sala limpa resistente à explosão
A reinforced hygienic steel door assembly engineered to transfer specified blast loads through its leaf, frame, anchors and heavy-duty hardware.
- High-Containment Laboratory Access
- 65-85 mm Door Leaf
- Powder-Coated or Stainless Finish
- Mineral-Fibre Infill Option
Introdução do produto
The Blast-Resistant Cleanroom Door combines smooth sealed steel faces with a deep reinforced leaf, structural internal members and a continuously welded frame. Hinges, latching points and wall anchors are arranged as one load path rather than selected as ordinary architectural hardware. Clean-side surfaces remain flat and wipeable, while concealed reinforcement supports demanding industrial cleanrooms where accidental pressure events form part of the facility risk design.
Características-chave
Reinforced hinges, latches and frame anchors continue the load path into the surrounding wall.
Flush metal faces and sealed perimeter joints remain compatible with controlled-area cleaning.
Heavy-gauge leaf skins resist local deformation around hardware and vision-panel openings.
Optional gasket arrangements reduce ordinary air leakage without obstructing emergency operation.
Preocupações do produto do cliente
An ordinary hygienic door can deform or separate from its frame during a pressure event.The leaf, frame, hardware and anchors are configured as a continuous reinforced load path.
Heavy reinforcement often creates dirt-catching seams on the clean side.Structural members remain enclosed behind smooth continuously sealed metal faces.
Concentrated forces around hinges and latches can initiate local failure.Reinforcement plates spread hardware loads into the internal stiffener network.
A bulky protection door may be difficult to operate during normal production.Selected bearing hinges and controlled closing hardware support routine personnel movement.
Aplicações típicas
Chemical and energetic-material cleanroomsBattery and powder-processing suitesControlled pilot plantsHigh-containment industrial laboratoriesProtected technical corridors
Parâmetros técnicos
| Material principal | Welded structural-steel stiffeners with optional mineral-fibre infill |
|---|---|
| Painel de espessura | Typically 65–75 mm reinforced door leaf |
| Largura efetiva | 800–1500 mm clear opening per leaf |
| Comprimento máximo | Up to 3000 mm leaf height |
| Aço enfrentando espessura | Typically 2.5–3.0 mm steel faces |
| Densidade Core | Approximately 7850 kg/m³ for structural-steel reinforcement; optional mineral infill 80–140 kg/m³ |
| Condutividade térmica | Approximately 45–60 W/(m·K) for carbon-steel structural components |
| Superfície acabado | Smooth powder-coated galvanized steel or brushed stainless steel |
| Tipo conjunto | Reinforced swing leaf with multi-point latching, heavy-duty hinges and sealed steel frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single or double swing configurationBrushed stainless clean-side finishFlush reinforced vision panelMechanical or monitored multi-point latching
Planning a Blast-Resistant Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
