Blast-resistant cleanroom door in a complete reinforced three-quarter view

클린룸 도어, 창문 및 인터락 시스템

폭발 방지 클린룸 도어

A reinforced hygienic steel door assembly engineered to transfer specified blast loads through its leaf, frame, anchors and heavy-duty hardware.

High-Containment Laboratory Access
65-85 mm Door Leaf
Powder-Coated or Stainless Finish
Mineral-Fibre Infill Option

견적 요청 제품 찾아보기

상품 소개

The Blast-Resistant Cleanroom Door combines smooth sealed steel faces with a deep reinforced leaf, structural internal members and a continuously welded frame. Hinges, latching points and wall anchors are arranged as one load path rather than selected as ordinary architectural hardware. Clean-side surfaces remain flat and wipeable, while concealed reinforcement supports demanding industrial cleanrooms where accidental pressure events form part of the facility risk design.

주요 기능

Structural steel stiffeners distribute transient pressure across the full door leaf.

Reinforced hinges, latches and frame anchors continue the load path into the surrounding wall.

Flush metal faces and sealed perimeter joints remain compatible with controlled-area cleaning.

Heavy-gauge leaf skins resist local deformation around hardware and vision-panel openings.

Optional gasket arrangements reduce ordinary air leakage without obstructing emergency operation.

고객 제품 관심사

An ordinary hygienic door can deform or separate from its frame during a pressure event.The leaf, frame, hardware and anchors are configured as a continuous reinforced load path.

Heavy reinforcement often creates dirt-catching seams on the clean side.Structural members remain enclosed behind smooth continuously sealed metal faces.

Concentrated forces around hinges and latches can initiate local failure.Reinforcement plates spread hardware loads into the internal stiffener network.

A bulky protection door may be difficult to operate during normal production.Selected bearing hinges and controlled closing hardware support routine personnel movement.

일반적인 응용 프로그램

Chemical and energetic-material cleanroomsBattery and powder-processing suitesControlled pilot plantsHigh-containment industrial laboratoriesProtected technical corridors

기술 매개변수

핵심 재료	Welded structural-steel stiffeners with optional mineral-fibre infill
패널 두께	Typically 65–75 mm reinforced door leaf
유효 폭	800–1500 mm clear opening per leaf
최대 길이	Up to 3000 mm leaf height
강철 면면 두께	Typically 2.5–3.0 mm steel faces
코어 밀도	Approximately 7850 kg/m³ for structural-steel reinforcement; optional mineral infill 80–140 kg/m³
열전도도 (Thermal Conductivity)	Approximately 45–60 W/(m·K) for carbon-steel structural components
표면 마무리	Smooth powder-coated galvanized steel or brushed stainless steel
접합 유형	Reinforced swing leaf with multi-point latching, heavy-duty hinges and sealed steel frame
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or double swing configurationBrushed stainless clean-side finishFlush reinforced vision panelMechanical or monitored multi-point latching

Planning a Blast-Resistant Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.