Blast-resistant cleanroom door in a complete reinforced three-quarter view

クリーンルームのドア、窓およびインターロックシステム

耐爆クリーンルームのドア

A reinforced hygienic steel door assembly engineered to transfer specified blast loads through its leaf, frame, anchors and heavy-duty hardware.

High-Containment Laboratory Access
65-85 mm Door Leaf
Powder-Coated or Stainless Finish
Mineral-Fibre Infill Option

見積もりリクエスト製品案内

商品紹介

The Blast-Resistant Cleanroom Door combines smooth sealed steel faces with a deep reinforced leaf, structural internal members and a continuously welded frame. Hinges, latching points and wall anchors are arranged as one load path rather than selected as ordinary architectural hardware. Clean-side surfaces remain flat and wipeable, while concealed reinforcement supports demanding industrial cleanrooms where accidental pressure events form part of the facility risk design.

主要な特徴

Structural steel stiffeners distribute transient pressure across the full door leaf.

Reinforced hinges, latches and frame anchors continue the load path into the surrounding wall.

Flush metal faces and sealed perimeter joints remain compatible with controlled-area cleaning.

Heavy-gauge leaf skins resist local deformation around hardware and vision-panel openings.

Optional gasket arrangements reduce ordinary air leakage without obstructing emergency operation.

お客様の製品に関する懸念事項

An ordinary hygienic door can deform or separate from its frame during a pressure event.The leaf, frame, hardware and anchors are configured as a continuous reinforced load path.

Heavy reinforcement often creates dirt-catching seams on the clean side.Structural members remain enclosed behind smooth continuously sealed metal faces.

Concentrated forces around hinges and latches can initiate local failure.Reinforcement plates spread hardware loads into the internal stiffener network.

A bulky protection door may be difficult to operate during normal production.Selected bearing hinges and controlled closing hardware support routine personnel movement.

典型的な用途

Chemical and energetic-material cleanroomsBattery and powder-processing suitesControlled pilot plantsHigh-containment industrial laboratoriesProtected technical corridors

技術的なパラメータ

コア材料	Welded structural-steel stiffeners with optional mineral-fibre infill
パネルの厚さ	Typically 65–75 mm reinforced door leaf
有効幅	800–1500 mm clear opening per leaf
最大長さ	Up to 3000 mm leaf height
鋼鉄の厚さを直面する	Typically 2.5–3.0 mm steel faces
コア密度	Approximately 7850 kg/m³ for structural-steel reinforcement; optional mineral infill 80–140 kg/m³
熱伝導率	Approximately 45–60 W/(m·K) for carbon-steel structural components
表面仕上げ	Smooth powder-coated galvanized steel or brushed stainless steel
ジョイントタイプ	Reinforced swing leaf with multi-point latching, heavy-duty hinges and sealed steel frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or double swing configurationBrushed stainless clean-side finishFlush reinforced vision panelMechanical or monitored multi-point latching

Planning a Blast-Resistant Cleanroom Door specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する