Blast-resistant cleanroom door in a complete reinforced three-quarter view

Pintu Bilik Bersih, Windows dan Sistem Interlock

Pintu bilik bersih tahan letupan

A reinforced hygienic steel door assembly engineered to transfer specified blast loads through its leaf, frame, anchors and heavy-duty hardware.

High-Containment Laboratory Access
65-85 mm Door Leaf
Powder-Coated or Stainless Finish
Mineral-Fibre Infill Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Blast-Resistant Cleanroom Door combines smooth sealed steel faces with a deep reinforced leaf, structural internal members and a continuously welded frame. Hinges, latching points and wall anchors are arranged as one load path rather than selected as ordinary architectural hardware. Clean-side surfaces remain flat and wipeable, while concealed reinforcement supports demanding industrial cleanrooms where accidental pressure events form part of the facility risk design.

Ciri-ciri Utama

Structural steel stiffeners distribute transient pressure across the full door leaf.

Reinforced hinges, latches and frame anchors continue the load path into the surrounding wall.

Flush metal faces and sealed perimeter joints remain compatible with controlled-area cleaning.

Heavy-gauge leaf skins resist local deformation around hardware and vision-panel openings.

Optional gasket arrangements reduce ordinary air leakage without obstructing emergency operation.

Kebimbangan Produk Pelanggan

An ordinary hygienic door can deform or separate from its frame during a pressure event.The leaf, frame, hardware and anchors are configured as a continuous reinforced load path.

Heavy reinforcement often creates dirt-catching seams on the clean side.Structural members remain enclosed behind smooth continuously sealed metal faces.

Concentrated forces around hinges and latches can initiate local failure.Reinforcement plates spread hardware loads into the internal stiffener network.

A bulky protection door may be difficult to operate during normal production.Selected bearing hinges and controlled closing hardware support routine personnel movement.

Permohonan yang biasa

Chemical and energetic-material cleanroomsBattery and powder-processing suitesControlled pilot plantsHigh-containment industrial laboratoriesProtected technical corridors

Parameter teknikal

Bahan Teras	Welded structural-steel stiffeners with optional mineral-fibre infill
Ketebalan Panel	Typically 65–75 mm reinforced door leaf
Lebar berkesan	800–1500 mm clear opening per leaf
Panjang maksimum	Up to 3000 mm leaf height
Keluli Menghadapi Ketebalan	Typically 2.5–3.0 mm steel faces
Ketumpatan teras	Approximately 7850 kg/m³ for structural-steel reinforcement; optional mineral infill 80–140 kg/m³
Kekonduksian Terma	Approximately 45–60 W/(m·K) for carbon-steel structural components
Kemasan permukaan	Smooth powder-coated galvanized steel or brushed stainless steel
Jenis Bersatu	Reinforced swing leaf with multi-point latching, heavy-duty hinges and sealed steel frame
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single or double swing configurationBrushed stainless clean-side finishFlush reinforced vision panelMechanical or monitored multi-point latching

Planning a Blast-Resistant Cleanroom Door specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami