Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte de salle blanche résistante aux explosions
A reinforced hygienic steel door assembly engineered to transfer specified blast loads through its leaf, frame, anchors and heavy-duty hardware.
- High-Containment Laboratory Access
- 65-85 mm Door Leaf
- Powder-Coated or Stainless Finish
- Mineral-Fibre Infill Option
Introduction de produit
The Blast-Resistant Cleanroom Door combines smooth sealed steel faces with a deep reinforced leaf, structural internal members and a continuously welded frame. Hinges, latching points and wall anchors are arranged as one load path rather than selected as ordinary architectural hardware. Clean-side surfaces remain flat and wipeable, while concealed reinforcement supports demanding industrial cleanrooms where accidental pressure events form part of the facility risk design.
Key Features
Reinforced hinges, latches and frame anchors continue the load path into the surrounding wall.
Flush metal faces and sealed perimeter joints remain compatible with controlled-area cleaning.
Heavy-gauge leaf skins resist local deformation around hardware and vision-panel openings.
Optional gasket arrangements reduce ordinary air leakage without obstructing emergency operation.
Préoccupations du client produit
An ordinary hygienic door can deform or separate from its frame during a pressure event.The leaf, frame, hardware and anchors are configured as a continuous reinforced load path.
Heavy reinforcement often creates dirt-catching seams on the clean side.Structural members remain enclosed behind smooth continuously sealed metal faces.
Concentrated forces around hinges and latches can initiate local failure.Reinforcement plates spread hardware loads into the internal stiffener network.
A bulky protection door may be difficult to operate during normal production.Selected bearing hinges and controlled closing hardware support routine personnel movement.
Les applications typiques
Chemical and energetic-material cleanroomsBattery and powder-processing suitesControlled pilot plantsHigh-containment industrial laboratoriesProtected technical corridors
Paramètres techniques
| Matériaux de base | Welded structural-steel stiffeners with optional mineral-fibre infill |
|---|---|
| Panneau épaisseur | Typically 65–75 mm reinforced door leaf |
| Largeur effective | 800–1500 mm clear opening per leaf |
| Longueur maximale | Up to 3000 mm leaf height |
| Acier face épaisseur | Typically 2.5–3.0 mm steel faces |
| Densité Core | Approximately 7850 kg/m³ for structural-steel reinforcement; optional mineral infill 80–140 kg/m³ |
| Conductivité thermique | Approximately 45–60 W/(m·K) for carbon-steel structural components |
| surface finie | Smooth powder-coated galvanized steel or brushed stainless steel |
| Type joint | Reinforced swing leaf with multi-point latching, heavy-duty hinges and sealed steel frame |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Single or double swing configurationBrushed stainless clean-side finishFlush reinforced vision panelMechanical or monitored multi-point latching
Planning a Blast-Resistant Cleanroom Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
