Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Cortina de PVC Antistática
Lightly tinted antistatic PVC cleanroom curtain with a bonded carbon grid, reinforced hanging header, weighted lower pocket and grounding lead.
- Bonded carbon grid creates a visible path to the grounding point
- Lightly tinted transparent PVC preserves sightlines between work zones
- Dedicated grounding lead connects the flexible barrier to facility ground
Introdução do produto
The Antistatic PVC Curtain combines a transparent flexible-vinyl barrier with a bonded conductive diamond grid and a defined grounding connection. A reinforced top header supports suspension, while sealed perimeter edges and a chain-weighted lower pocket stabilize the panel. When the grounding lead is correctly connected, the grid provides a controlled route for accumulated surface charge instead of leaving the softwall electrically isolated.
Características-chave
Grounding snap and ring-terminal lead simplify connection checks
Transparent pale-blue sheet supports supervision and light transmission
Smooth sealed surface can be wiped without exposed fabric edges
Weighted lower pocket limits panel flutter in filtered airflow
Preocupações do produto do cliente
Static-control performance depends on an intact conductive path, correct grounding and suitable cleaning practice. A damaged grid, disconnected lead or insulating residue can reduce the intended charge-dissipation function.
The curtain may remain electrically isolated if the lead is not connected.Connect the ring terminal to an approved ground point and include it in routine checks.
Cuts or deep abrasion can interrupt sections of the carbon grid.Inspect the grid and grounding snap for continuity after installation or impact.
Cleaner residue can leave an insulating film over the dissipative surface.Use a compatible low-residue cleaner and follow the defined wipe sequence.
Poor overlap can create an airflow gap even when ESD control is satisfactory.Specify the panel width and overlap separately from the electrical requirements.
Aplicações típicas
For semiconductor assembly, electronics production, precision optics, battery-component handling, ESD-controlled inspection cells and softwall clean zones where both particle separation and charge management are required.
Parâmetros técnicos
The ranges below cover conductive-grid and static-dissipative flexible PVC curtain panels used in ESD-sensitive controlled areas. Final film formulation, grounding hardware, drop and overlap should match the facility static-control plan.
| Material principal | Lightly tinted static-dissipative flexible PVC with bonded carbon grid and grounding lead |
|---|---|
| Painel de espessura | 0.5-1.0 mm flexible PVC film |
| Largura efetiva | 1200-1370 mm nominal finished panel width |
| Comprimento máximo | 7925 mm maximum listed curtain height |
| Aço enfrentando espessura | 0 mm; no steel facing on the flexible curtain |
| Densidade Core | 1210-1300 kg/m³ antistatic flexible PVC |
| Condutividade térmica | Approximately 0.16 W/(m·K) for flexible PVC |
| Superfície acabado | Lightly tinted transparent PVC with visible bonded conductive diamond grid |
| Tipo conjunto | RF-welded hems with grounded snap connection, panel overlap and weighted lower pocket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
0.5 mm conductive-grid or 1.0 mm static-dissipative PVCClear or lightly blue-tinted transparent filmCustom panel width, height and overlapEyelet, hook-bead, round-bead or track suspensionSnap lead, ring-terminal lead or facility-specific grounding hardwareWeighted chain pocket or heavier self-hanging panel edge
Planning a Antistatic PVC Curtain specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
