English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
ستارة PVC مضادة للساكنة
Lightly tinted antistatic PVC cleanroom curtain with a bonded carbon grid, reinforced hanging header, weighted lower pocket and grounding lead.
- Bonded carbon grid creates a visible path to the grounding point
- Lightly tinted transparent PVC preserves sightlines between work zones
- Dedicated grounding lead connects the flexible barrier to facility ground
مقدمة المنتج
The Antistatic PVC Curtain combines a transparent flexible-vinyl barrier with a bonded conductive diamond grid and a defined grounding connection. A reinforced top header supports suspension, while sealed perimeter edges and a chain-weighted lower pocket stabilize the panel. When the grounding lead is correctly connected, the grid provides a controlled route for accumulated surface charge instead of leaving the softwall electrically isolated.
الخصائص الرئيسية
Grounding snap and ring-terminal lead simplify connection checks
Transparent pale-blue sheet supports supervision and light transmission
Smooth sealed surface can be wiped without exposed fabric edges
Weighted lower pocket limits panel flutter in filtered airflow
مخاوف المنتج للعملاء
Static-control performance depends on an intact conductive path, correct grounding and suitable cleaning practice. A damaged grid, disconnected lead or insulating residue can reduce the intended charge-dissipation function.
The curtain may remain electrically isolated if the lead is not connected.Connect the ring terminal to an approved ground point and include it in routine checks.
Cuts or deep abrasion can interrupt sections of the carbon grid.Inspect the grid and grounding snap for continuity after installation or impact.
Cleaner residue can leave an insulating film over the dissipative surface.Use a compatible low-residue cleaner and follow the defined wipe sequence.
Poor overlap can create an airflow gap even when ESD control is satisfactory.Specify the panel width and overlap separately from the electrical requirements.
تطبيقات نموذجية
For semiconductor assembly, electronics production, precision optics, battery-component handling, ESD-controlled inspection cells and softwall clean zones where both particle separation and charge management are required.
المعلمات الفنية
The ranges below cover conductive-grid and static-dissipative flexible PVC curtain panels used in ESD-sensitive controlled areas. Final film formulation, grounding hardware, drop and overlap should match the facility static-control plan.
| المواد الأساسية | Lightly tinted static-dissipative flexible PVC with bonded carbon grid and grounding lead |
|---|---|
| سمك اللوحة | 0.5-1.0 mm flexible PVC film |
| العرض الفعال | 1200-1370 mm nominal finished panel width |
| الحد الأقصى الطول | 7925 mm maximum listed curtain height |
| الصلب يواجه سمك | 0 mm; no steel facing on the flexible curtain |
| الكثافة الأساسية | 1210-1300 kg/m³ antistatic flexible PVC |
| الموصلية الحرارية | Approximately 0.16 W/(m·K) for flexible PVC |
| إنهاء السطح | Lightly tinted transparent PVC with visible bonded conductive diamond grid |
| نوع المشترك | RF-welded hems with grounded snap connection, panel overlap and weighted lower pocket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
0.5 mm conductive-grid or 1.0 mm static-dissipative PVCClear or lightly blue-tinted transparent filmCustom panel width, height and overlapEyelet, hook-bead, round-bead or track suspensionSnap lead, ring-terminal lead or facility-specific grounding hardwareWeighted chain pocket or heavier self-hanging panel edge
Planning a Antistatic PVC Curtain specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
