クリーンルーム機器と無菌施設の必需品のワンストップサプライヤー国際プロジェクト支援
Open mobile navigationClose mobile navigation
クリーンルーム衣料品、 PPE 、消耗品

帯電防止 PVC カーテン

Lightly tinted antistatic PVC cleanroom curtain with a bonded carbon grid, reinforced hanging header, weighted lower pocket and grounding lead.
  • Bonded carbon grid creates a visible path to the grounding point
  • Lightly tinted transparent PVC preserves sightlines between work zones
  • Dedicated grounding lead connects the flexible barrier to facility ground
見積もりリクエスト 製品案内

商品紹介

The Antistatic PVC Curtain combines a transparent flexible-vinyl barrier with a bonded conductive diamond grid and a defined grounding connection. A reinforced top header supports suspension, while sealed perimeter edges and a chain-weighted lower pocket stabilize the panel. When the grounding lead is correctly connected, the grid provides a controlled route for accumulated surface charge instead of leaving the softwall electrically isolated.

主要な特徴

Fine conductive grid remains visible for continuity inspection

Grounding snap and ring-terminal lead simplify connection checks

Transparent pale-blue sheet supports supervision and light transmission

Smooth sealed surface can be wiped without exposed fabric edges

Weighted lower pocket limits panel flutter in filtered airflow

お客様の製品に関する懸念事項

Static-control performance depends on an intact conductive path, correct grounding and suitable cleaning practice. A damaged grid, disconnected lead or insulating residue can reduce the intended charge-dissipation function.

The curtain may remain electrically isolated if the lead is not connected.Connect the ring terminal to an approved ground point and include it in routine checks.
Cuts or deep abrasion can interrupt sections of the carbon grid.Inspect the grid and grounding snap for continuity after installation or impact.
Cleaner residue can leave an insulating film over the dissipative surface.Use a compatible low-residue cleaner and follow the defined wipe sequence.
Poor overlap can create an airflow gap even when ESD control is satisfactory.Specify the panel width and overlap separately from the electrical requirements.

典型的な用途

For semiconductor assembly, electronics production, precision optics, battery-component handling, ESD-controlled inspection cells and softwall clean zones where both particle separation and charge management are required.

技術的なパラメータ

The ranges below cover conductive-grid and static-dissipative flexible PVC curtain panels used in ESD-sensitive controlled areas. Final film formulation, grounding hardware, drop and overlap should match the facility static-control plan.

コア材料Lightly tinted static-dissipative flexible PVC with bonded carbon grid and grounding lead
パネルの厚さ0.5-1.0 mm flexible PVC film
有効幅1200-1370 mm nominal finished panel width
最大長さ7925 mm maximum listed curtain height
鋼鉄の厚さを直面する0 mm; no steel facing on the flexible curtain
コア密度1210-1300 kg/m³ antistatic flexible PVC
熱伝導率Approximately 0.16 W/(m·K) for flexible PVC
表面仕上げLightly tinted transparent PVC with visible bonded conductive diamond grid
ジョイントタイプRF-welded hems with grounded snap connection, panel overlap and weighted lower pocket
カスタマイズ意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

0.5 mm conductive-grid or 1.0 mm static-dissipative PVCClear or lightly blue-tinted transparent filmCustom panel width, height and overlapEyelet, hook-bead, round-bead or track suspensionSnap lead, ring-terminal lead or facility-specific grounding hardwareWeighted chain pocket or heavier self-hanging panel edge

Planning a Antistatic PVC Curtain specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する
メール送信 WhatsApp WeChat

ホーム

製品

ニュース

会社概要

お問い合わせ