Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Rideau PVC antistatique
Lightly tinted antistatic PVC cleanroom curtain with a bonded carbon grid, reinforced hanging header, weighted lower pocket and grounding lead.
- Bonded carbon grid creates a visible path to the grounding point
- Lightly tinted transparent PVC preserves sightlines between work zones
- Dedicated grounding lead connects the flexible barrier to facility ground
Introduction de produit
The Antistatic PVC Curtain combines a transparent flexible-vinyl barrier with a bonded conductive diamond grid and a defined grounding connection. A reinforced top header supports suspension, while sealed perimeter edges and a chain-weighted lower pocket stabilize the panel. When the grounding lead is correctly connected, the grid provides a controlled route for accumulated surface charge instead of leaving the softwall electrically isolated.
Key Features
Grounding snap and ring-terminal lead simplify connection checks
Transparent pale-blue sheet supports supervision and light transmission
Smooth sealed surface can be wiped without exposed fabric edges
Weighted lower pocket limits panel flutter in filtered airflow
Préoccupations du client produit
Static-control performance depends on an intact conductive path, correct grounding and suitable cleaning practice. A damaged grid, disconnected lead or insulating residue can reduce the intended charge-dissipation function.
The curtain may remain electrically isolated if the lead is not connected.Connect the ring terminal to an approved ground point and include it in routine checks.
Cuts or deep abrasion can interrupt sections of the carbon grid.Inspect the grid and grounding snap for continuity after installation or impact.
Cleaner residue can leave an insulating film over the dissipative surface.Use a compatible low-residue cleaner and follow the defined wipe sequence.
Poor overlap can create an airflow gap even when ESD control is satisfactory.Specify the panel width and overlap separately from the electrical requirements.
Les applications typiques
For semiconductor assembly, electronics production, precision optics, battery-component handling, ESD-controlled inspection cells and softwall clean zones where both particle separation and charge management are required.
Paramètres techniques
The ranges below cover conductive-grid and static-dissipative flexible PVC curtain panels used in ESD-sensitive controlled areas. Final film formulation, grounding hardware, drop and overlap should match the facility static-control plan.
| Matériaux de base | Lightly tinted static-dissipative flexible PVC with bonded carbon grid and grounding lead |
|---|---|
| Panneau épaisseur | 0.5-1.0 mm flexible PVC film |
| Largeur effective | 1200-1370 mm nominal finished panel width |
| Longueur maximale | 7925 mm maximum listed curtain height |
| Acier face épaisseur | 0 mm; no steel facing on the flexible curtain |
| Densité Core | 1210-1300 kg/m³ antistatic flexible PVC |
| Conductivité thermique | Approximately 0.16 W/(m·K) for flexible PVC |
| surface finie | Lightly tinted transparent PVC with visible bonded conductive diamond grid |
| Type joint | RF-welded hems with grounded snap connection, panel overlap and weighted lower pocket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
0.5 mm conductive-grid or 1.0 mm static-dissipative PVCClear or lightly blue-tinted transparent filmCustom panel width, height and overlapEyelet, hook-bead, round-bead or track suspensionSnap lead, ring-terminal lead or facility-specific grounding hardwareWeighted chain pocket or heavier self-hanging panel edge
Planning a Antistatic PVC Curtain specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
