Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Z Estação de mudança de gaiola animal
A wide ventilated workstation that provides filtered product air and local capture around open cages during bedding, feed and housing changes.
- Wide Cage-Handling Surface
- Filtered Vertical Downflow
- Front and Rear Capture
- Mobile Height Options
Introdução do produto
The cage changing station is sized for opening and transferring between two animal cages on one broad stainless surface. Filtered downflow protects the work area while front and rear grilles capture dander, bedding dust and aerosols generated during handling. Open ends or a low-profile sash keep cages accessible, and a mobile lift base can adjust the working height for different users. The airflow arrangement is selected for animal, operator and room protection needs.
Características-chave
Front and rear capture grilles collect bedding dust near the handling plane.
Filtered downflow reduces cross-contamination across the open work area.
Rounded edges and removable grille sections support daily sanitation.
A mobile electric-height base can accommodate seated or standing work.
Preocupações do produto do cliente
Cage changing produces dander and bedding dust while requiring wide access for two bulky enclosures and careful animal handling.
Two cages crowd a standard laboratory cabinet.The broad work surface is sized for side-by-side cage placement.
Bedding dust reaches the operator during transfer.Front and rear grilles capture particles at the work-surface boundary.
Fixed bench height causes awkward repetitive posture.An optional electric lift base adjusts the station to the operator and cage type.
Loose bedding collects inside narrow grille slots.Removable perforated sections expose the stainless collection channels.
Aplicações típicas
Rodent cage changingVivarium bedding replacementFeed and water serviceClean cage preparation
Parâmetros técnicos
Typical configurable construction ranges for an animal cage changing station are listed below.
| Material principal | SUS304 work surface and capture grilles with powder-coated steel fan base and mineral-wool acoustic lining |
|---|---|
| Painel de espessura | 30-60 mm double-skin fan and plenum sections |
| Largura efetiva | 1200-2100 mm clear cage-handling width |
| Comprimento máximo | Up to 1200 mm overall station depth |
| Aço enfrentando espessura | 1.2-1.5 mm SUS304 worktop; 1.0-1.2 mm outer steel |
| Densidade Core | 80-120 kg/m³ mineral-wool acoustic lining |
| Condutividade térmica | 0.035-0.045 W/(m·K) for the acoustic lining |
| Superfície acabado | Brushed SUS304 work zone with low-sheen powder-coated mobile base |
| Tipo conjunto | Welded raised-edge work tray with removable perforated grilles and gasketed filter housings |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Mobile or fixed baseElectric height adjustmentSingle- or dual-sided accessIntegrated waste and bedding ports
Planning a Animal Cage Changing Station specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
