Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Estación de cambio de jaula animal
A wide ventilated workstation that provides filtered product air and local capture around open cages during bedding, feed and housing changes.
- Wide Cage-Handling Surface
- Filtered Vertical Downflow
- Front and Rear Capture
- Mobile Height Options
Introducción del producto
The cage changing station is sized for opening and transferring between two animal cages on one broad stainless surface. Filtered downflow protects the work area while front and rear grilles capture dander, bedding dust and aerosols generated during handling. Open ends or a low-profile sash keep cages accessible, and a mobile lift base can adjust the working height for different users. The airflow arrangement is selected for animal, operator and room protection needs.
Características clave
Front and rear capture grilles collect bedding dust near the handling plane.
Filtered downflow reduces cross-contamination across the open work area.
Rounded edges and removable grille sections support daily sanitation.
A mobile electric-height base can accommodate seated or standing work.
Preocupaciones del producto del cliente
Cage changing produces dander and bedding dust while requiring wide access for two bulky enclosures and careful animal handling.
Two cages crowd a standard laboratory cabinet.The broad work surface is sized for side-by-side cage placement.
Bedding dust reaches the operator during transfer.Front and rear grilles capture particles at the work-surface boundary.
Fixed bench height causes awkward repetitive posture.An optional electric lift base adjusts the station to the operator and cage type.
Loose bedding collects inside narrow grille slots.Removable perforated sections expose the stainless collection channels.
Aplicaciones típicas
Rodent cage changingVivarium bedding replacementFeed and water serviceClean cage preparation
Parámetros técnicos
Typical configurable construction ranges for an animal cage changing station are listed below.
| Materiales Core | SUS304 work surface and capture grilles with powder-coated steel fan base and mineral-wool acoustic lining |
|---|---|
| Panel de espesor | 30-60 mm double-skin fan and plenum sections |
| Ancho efectivo | 1200-2100 mm clear cage-handling width |
| Longitud máxima | Up to 1200 mm overall station depth |
| Acero frente a espesor | 1.2-1.5 mm SUS304 worktop; 1.0-1.2 mm outer steel |
| Densidad Core | 80 - 120 kg / m3 revestimiento acústico de lana mineral |
| Conductividad térmica | 0,035 - 0,045 W / (m · K) para el revestimiento acústico |
| Superficie acabada | Brushed SUS304 work zone with low-sheen powder-coated mobile base |
| Tipo conjunto | Welded raised-edge work tray with removable perforated grilles and gasketed filter housings |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Mobile or fixed baseElectric height adjustmentSingle- or dual-sided accessIntegrated waste and bedding ports
Planning a Animal Cage Changing Station specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
