English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Станция смены клетки животных
A wide ventilated workstation that provides filtered product air and local capture around open cages during bedding, feed and housing changes.
- Wide Cage-Handling Surface
- Filtered Vertical Downflow
- Front and Rear Capture
- Mobile Height Options
Введение продукции
The cage changing station is sized for opening and transferring between two animal cages on one broad stainless surface. Filtered downflow protects the work area while front and rear grilles capture dander, bedding dust and aerosols generated during handling. Open ends or a low-profile sash keep cages accessible, and a mobile lift base can adjust the working height for different users. The airflow arrangement is selected for animal, operator and room protection needs.
Основные характеристики
Front and rear capture grilles collect bedding dust near the handling plane.
Filtered downflow reduces cross-contamination across the open work area.
Rounded edges and removable grille sections support daily sanitation.
A mobile electric-height base can accommodate seated or standing work.
Обеспокоенность клиентов продуктами
Cage changing produces dander and bedding dust while requiring wide access for two bulky enclosures and careful animal handling.
Two cages crowd a standard laboratory cabinet.The broad work surface is sized for side-by-side cage placement.
Bedding dust reaches the operator during transfer.Front and rear grilles capture particles at the work-surface boundary.
Fixed bench height causes awkward repetitive posture.An optional electric lift base adjusts the station to the operator and cage type.
Loose bedding collects inside narrow grille slots.Removable perforated sections expose the stainless collection channels.
Типичные приложения
Rodent cage changingVivarium bedding replacementFeed and water serviceClean cage preparation
Технические параметры
Typical configurable construction ranges for an animal cage changing station are listed below.
| Основной материал | SUS304 work surface and capture grilles with powder-coated steel fan base and mineral-wool acoustic lining |
|---|---|
| Толщина панели | 30-60 mm double-skin fan and plenum sections |
| эффективная ширина | 1200-2100 mm clear cage-handling width |
| Максимальная длина | Up to 1200 mm overall station depth |
| Толщина линий стали | 1.2-1.5 mm SUS304 worktop; 1.0-1.2 mm outer steel |
| Плотность ядра | 80-120 kg/m³ mineral-wool acoustic lining |
| Теплопроводимость | 0.035-0.045 W/(m·K) for the acoustic lining |
| Поверхностная отделка | Brushed SUS304 work zone with low-sheen powder-coated mobile base |
| Объединенный тип | Welded raised-edge work tray with removable perforated grilles and gasketed filter housings |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Mobile or fixed baseElectric height adjustmentSingle- or dual-sided accessIntegrated waste and bedding ports
Planning a Animal Cage Changing Station specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
