İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Hayvan Kafesleri Değiştirme İstasyonu
A wide ventilated workstation that provides filtered product air and local capture around open cages during bedding, feed and housing changes.
- Wide Cage-Handling Surface
- Filtered Vertical Downflow
- Front and Rear Capture
- Mobile Height Options
Ürün tanıtımı
The cage changing station is sized for opening and transferring between two animal cages on one broad stainless surface. Filtered downflow protects the work area while front and rear grilles capture dander, bedding dust and aerosols generated during handling. Open ends or a low-profile sash keep cages accessible, and a mobile lift base can adjust the working height for different users. The airflow arrangement is selected for animal, operator and room protection needs.
Ana Özellikler
Front and rear capture grilles collect bedding dust near the handling plane.
Filtered downflow reduces cross-contamination across the open work area.
Rounded edges and removable grille sections support daily sanitation.
A mobile electric-height base can accommodate seated or standing work.
Müşteri Ürün Sorunları
Cage changing produces dander and bedding dust while requiring wide access for two bulky enclosures and careful animal handling.
Two cages crowd a standard laboratory cabinet.The broad work surface is sized for side-by-side cage placement.
Bedding dust reaches the operator during transfer.Front and rear grilles capture particles at the work-surface boundary.
Fixed bench height causes awkward repetitive posture.An optional electric lift base adjusts the station to the operator and cage type.
Loose bedding collects inside narrow grille slots.Removable perforated sections expose the stainless collection channels.
Tipik uygulamalar
Rodent cage changingVivarium bedding replacementFeed and water serviceClean cage preparation
Teknik parametreler
Typical configurable construction ranges for an animal cage changing station are listed below.
| Temel malzemeler | SUS304 work surface and capture grilles with powder-coated steel fan base and mineral-wool acoustic lining |
|---|---|
| Panel kalınlığı | 30-60 mm double-skin fan and plenum sections |
| Effective Width (Etkili Genişlik) | 1200-2100 mm clear cage-handling width |
| Maksimum uzunluk | Up to 1200 mm overall station depth |
| Çelik yüz yüze kalınlığı | 1.2-1.5 mm SUS304 worktop; 1.0-1.2 mm outer steel |
| Core Density (Çekirdek Yoğunluğu) | 80-120 kg/m³ mineral-wool acoustic lining |
| Termal İletkenlik | 0.035-0.045 W/(m·K) for the acoustic lining |
| Yüzey bitirme | Brushed SUS304 work zone with low-sheen powder-coated mobile base |
| Ortak tip | Welded raised-edge work tray with removable perforated grilles and gasketed filter housings |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Mobile or fixed baseElectric height adjustmentSingle- or dual-sided accessIntegrated waste and bedding ports
Planning a Animal Cage Changing Station specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
