Animal cage changing station with broad stainless work surface

Aliran Laminar dan Peralatan Penahanan

Stasiun Pengganti Sangkar Hewan

A wide ventilated workstation that provides filtered product air and local capture around open cages during bedding, feed and housing changes.

Wide Cage-Handling Surface
Filtered Vertical Downflow
Front and Rear Capture
Mobile Height Options

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cage changing station is sized for opening and transferring between two animal cages on one broad stainless surface. Filtered downflow protects the work area while front and rear grilles capture dander, bedding dust and aerosols generated during handling. Open ends or a low-profile sash keep cages accessible, and a mobile lift base can adjust the working height for different users. The airflow arrangement is selected for animal, operator and room protection needs.

Fitur utama:

A wide uninterrupted work surface holds source and clean cages side by side.

Front and rear capture grilles collect bedding dust near the handling plane.

Filtered downflow reduces cross-contamination across the open work area.

Rounded edges and removable grille sections support daily sanitation.

A mobile electric-height base can accommodate seated or standing work.

Kekhawatiran produk pelanggan

Cage changing produces dander and bedding dust while requiring wide access for two bulky enclosures and careful animal handling.

Two cages crowd a standard laboratory cabinet.The broad work surface is sized for side-by-side cage placement.

Bedding dust reaches the operator during transfer.Front and rear grilles capture particles at the work-surface boundary.

Fixed bench height causes awkward repetitive posture.An optional electric lift base adjusts the station to the operator and cage type.

Loose bedding collects inside narrow grille slots.Removable perforated sections expose the stainless collection channels.

Aplikasi yang Tipis

Rodent cage changingVivarium bedding replacementFeed and water serviceClean cage preparation

Parameter teknis

Typical configurable construction ranges for an animal cage changing station are listed below.

Bahan inti	SUS304 work surface and capture grilles with powder-coated steel fan base and mineral-wool acoustic lining
Ketebalan Panel (Panel Thickness)	30-60 mm double-skin fan and plenum sections
Efektif lebar	1200-2100 mm clear cage-handling width
Panjang maksimum	Up to 1200 mm overall station depth
Baja menghadap ketebalan	1.2-1.5 mm SUS304 worktop; 1.0-1.2 mm outer steel
Kepadatan inti (core density)	80 - 120 kg / m3 lapisan akustik mineral-wol
Konduktivitas Termal (Thermal Conductivity)	0,035 - 0,045 W / (m · K) untuk lapisan akustik
Permukaan selesai	Brushed SUS304 work zone with low-sheen powder-coated mobile base
Jenis Bersama	Welded raised-edge work tray with removable perforated grilles and gasketed filter housings
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Mobile or fixed baseElectric height adjustmentSingle- or dual-sided accessIntegrated waste and bedding ports

Planning a Animal Cage Changing Station specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami