Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Air Shower Nozzle (em inglês)
An adjustable stainless steel jet nozzle that directs high-velocity filtered air across garments, components and packaged materials inside an air shower.
- Directional Ball Joint
- Satin Stainless Steel
- Four-Hole Mounting Flange
- Focused Air Jet
Introdução do produto
The air shower nozzle converts plenum airflow into a focused cleaning jet and allows its discharge direction to be set during commissioning. Its spherical eyeball rotates within a circular retaining flange, while a short smooth outlet limits unnecessary turbulence. Satin stainless-steel construction suits repeated cleaning and visually matches common air-shower interiors. Replacement work should verify flange diameter, mounting-hole pitch, outlet bore and available adjustment clearance.
Características-chave
A smooth circular outlet provides a defined discharge path without protruding vanes.
Four countersunk mounting holes distribute clamping around the round flange.
Satin stainless-steel surfaces provide durable, cleanable exposed hardware.
Preocupações do produto do cliente
Nozzle geometry and aiming range determine whether filtered air reaches the intended surfaces without leaving sheltered zones.
A fixed outlet cannot be aimed at garment folds or irregular material loads.The spherical eyeball provides directional adjustment during air-shower balancing.
An incorrect flange diameter leaves exposed cutouts in the cabinet panel.The mounting flange and hole pitch can be matched to the existing panel opening.
Rough internal edges create noise and an uneven discharge pattern.A smooth machined outlet supports a focused and repeatable air jet.
Corroded or difficult-to-clean outlets compromise the chamber interior.Satin stainless-steel construction provides a durable wipe-clean exposed surface.
Aplicações típicas
Personnel air shower walls and ceilingsMaterial air shower chambersCleanroom pass-through air showersReplacement nozzle upgrades and refurbishment
Parâmetros técnicos
Typical construction and dimensional ranges for adjustable air shower jet nozzles are shown below.
| Material principal | 304 stainless-steel flange, spherical eyeball and discharge tube |
|---|---|
| Painel de espessura | 20-100 mm compatible air-shower wall or ceiling assembly |
| Largura efetiva | 60-120 mm nominal mounting-flange diameter |
| Comprimento máximo | Up to 110 mm overall nozzle depth |
| Aço enfrentando espessura | 1.0-2.0 mm nominal formed or machined stainless-steel section |
| Densidade Core | 7900-8000 kg/m³ for stainless-steel components |
| Condutividade térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superfície acabado | Fine satin-brushed natural stainless steel with smooth outlet bore |
| Tipo conjunto | Adjustable spherical eyeball retained in a four-hole circular mounting flange |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Alternative flange diametersMatched outlet bore sizesCustom mounting-hole pitch304 or 316 stainless-steel construction
Planning a Air Shower Nozzle specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
