Three-quarter view of an adjustable stainless steel air shower nozzle

クリーンルーム機器のスペアパーツ

Air シャワーノズル

An adjustable stainless steel jet nozzle that directs high-velocity filtered air across garments, components and packaged materials inside an air shower.

Directional Ball Joint
Satin Stainless Steel
Four-Hole Mounting Flange
Focused Air Jet

見積もりリクエスト製品案内

商品紹介

The air shower nozzle converts plenum airflow into a focused cleaning jet and allows its discharge direction to be set during commissioning. Its spherical eyeball rotates within a circular retaining flange, while a short smooth outlet limits unnecessary turbulence. Satin stainless-steel construction suits repeated cleaning and visually matches common air-shower interiors. Replacement work should verify flange diameter, mounting-hole pitch, outlet bore and available adjustment clearance.

主要な特徴

The spherical center section pivots to aim the air jet toward the required cleaning zone.

A smooth circular outlet provides a defined discharge path without protruding vanes.

Four countersunk mounting holes distribute clamping around the round flange.

Satin stainless-steel surfaces provide durable, cleanable exposed hardware.

お客様の製品に関する懸念事項

Nozzle geometry and aiming range determine whether filtered air reaches the intended surfaces without leaving sheltered zones.

A fixed outlet cannot be aimed at garment folds or irregular material loads.The spherical eyeball provides directional adjustment during air-shower balancing.

An incorrect flange diameter leaves exposed cutouts in the cabinet panel.The mounting flange and hole pitch can be matched to the existing panel opening.

Rough internal edges create noise and an uneven discharge pattern.A smooth machined outlet supports a focused and repeatable air jet.

Corroded or difficult-to-clean outlets compromise the chamber interior.Satin stainless-steel construction provides a durable wipe-clean exposed surface.

典型的な用途

Personnel air shower walls and ceilingsMaterial air shower chambersCleanroom pass-through air showersReplacement nozzle upgrades and refurbishment

技術的なパラメータ

Typical construction and dimensional ranges for adjustable air shower jet nozzles are shown below.

コア材料	304 stainless-steel flange, spherical eyeball and discharge tube
パネルの厚さ	20-100 mm compatible air-shower wall or ceiling assembly
有効幅	60-120 mm nominal mounting-flange diameter
最大長さ	Up to 110 mm overall nozzle depth
鋼鉄の厚さを直面する	1.0-2.0 mm nominal formed or machined stainless-steel section
コア密度	7900-8000 kg/m³ for stainless-steel components
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Fine satin-brushed natural stainless steel with smooth outlet bore
ジョイントタイプ	Adjustable spherical eyeball retained in a four-hole circular mounting flange
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Alternative flange diametersMatched outlet bore sizesCustom mounting-hole pitch304 or 316 stainless-steel construction

Planning a Air Shower Nozzle specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する